Analog classic series, analog corded 1/2-line/trimstyle lobby hotel telephone, analog cordless charging base, analog cordless 1/2-line accessory handset (42 pages)
Analog corded lobby hotel phone,analog corded 1-line hotel phone, corded analog corded 2-line hotel phone ,analog corded trimstyle hotel phone,analog cordless 1-line hotel phone, analog cordless 2-line hotel phone, analog cordless charging base, analog co (72 pages)
Analog corded lobby hotel telephone - a1100, analog corded 1-line hotel telephone - a1210/cl-a1110, analog corded 2-line hotel telephone - a1220, analog corded trimstyle hotel telephone - a1310/a1311, analog cordless 1-line hotel telephone - a1410, a (56 pages)
Telephone base with Corded Mounting Telephone faceplate and overlay handset bracket line cord Telephone layout Analog corded 1-line - A2210-NS MESSAGE WAITING LED DATA port Switch hook Wall mount clip Sticker covering jumpers RINGER VOL Speed Dial keys PAUSE (recessed key)
Installation Telephone base installation This telephone can be adapted to desktop use or mount on a standard telephone wall plate. Installation option - desktop position Turn the telephone base over with the bottom side facing up. Connect the coiled handset cord to the telephone base. Coiled handset cord jack Insert the tabs into the grooves to affix the mounting bracket in place.
Installation option - converting from desktop to wall mount position To mount the telephone base on the wall: Set aside the handset. On the telephone base cradle, place a coin in the provided slit of the wall mount clip and rotate a half turn (80 degrees).
Telephone settings Default settings are indicated by asterisks (*). Setting Options Adjustable by: Handset earpiece volume 1, 2*, 3, 4 User and administrator Ringer volume Low, Medium*, High User and administrator Ringer tone Tone 1*, Tone 2, Tone 3 Administrator only Flash 1 (00ms), 2 (00ms), 3* (600ms) Administrator only...
Voicemail voltage detection There are options to set the voicemail voltage detection on the telephone base. To disable the voicemail voltage detection: Remove the faceplate and overlay if they are on the telephone base. Then remove the sticker on the telephone base. Use a narrow object to unplug all the jumpers from the telephone base.
Telephone operation Receive a call When there is an incoming call, the telephone rings and the MESSAGE WAITING LED flashes. To answer a call: Lift the corded handset from the telephone base. Place a call Lift the corded handset. Listen for a dial tone and then dial the desired number, or press a Speed Dial key to dial a programmed number.
Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: This product should be installed by a qualified technician. This product should only be connected to the host equipment and never directly to the network such as Public Switch Telephone Network (PSTN) or Plain Old Telephone Services (POTS).
A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008. Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5. VTech is the registered trademark of VTech Holdings Limited.