Set Up - VTech Analog Classic Series User Manual

Set up

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
Ringer volume
Ringer tone
Voicemail voltage detection
Ringer tone
There are 3 ringer tone options.
To change the ringer tone
1. Turn the telephone base over with the
bottom side facing up. Remove the
mounting bracket if it is in desktop position.
Press the tabs of the mounting bracket as
the direction indicated below to release
and remove the mounting bracket from
the telephone base.
2. Slide the ringer tone switch to select the
desired detented position, using a narrow
object such as a standard screwdriver.
3. Install the mounting bracket again to
resume its desktop position.
Options
1, 2*, 3, 4
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
Disable voicemail voltage detection,
Periodic low voltage pulse detection
method, Steady high voltage and
periodic high voltage pulse detection
method
EN - 9
Adjustable by
User and administrator
User and administrator
Adminstrator only
Adminstrator only
Ringer tone
switch
Mounting
bracket