Set Up - VTech Analogue Next Gen Series User Manual

Set up

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
Speakerphone volume
Ringer tone
Voicemail voltage detection
Ringer tone
There are 3 ringer tone options.
To change the ringer tone:
1. Turn the telephone base over with the bottom side facing up. Remove the mounting bracket if it
is in desktop position. To remove the mounting bracket, firmly push both tabs downward and pull
up until they release from the grooves.
2. Slide the ringer tone switch (on the left, in the middle or on the right) to select the desired
detented position using a narrow object such as a standard screwdriver.
3. Install the mounting bracket accordingly.
Options
1, 2*, 3
1, 2, 3, 4*, 5, 6
Tone 1*, Tone 2, Tone 3
Disable voicemail voltage detection,
Periodic low voltage pulse detection
method, Steady high voltage and
periodic high voltage pulse detection
method
EN - 12
Adjustable by
User and administrator
User and administrator
Administrator only
Administrator only