Viewing Mode
BATTERY PACK:
1. Remove the battery cover off the base of the
camera.
2. Insert 4 x AA batteries (not included) into the
Battery Pack. Make sure to correctly line up the
Positive (+) and Negative (-) terminals of the
batteries.
3. Place the battery cover back on.
NOTE: If the camera is plugged in with the AC
Adapter, the batteries will not be used. The batteries
are intended for short term, portable camera use
only.
Camera Positioning
The camera can be placed on a flat
surface, or wall mounted. The versatile
stand allows for several different
mounting options.
Viewing Mode
1. SIGNAL INDICATOR – The signal indicator shows the
strength of the signal being received from the camera.
The number of bars in the Signal Indicator shows the
strength of the signal – One or No Bars indicates the
signal is poor, and 4 bars indicate a very strong signal.
Signal Indicators:
Signal Strength
Perfect
Good
Fair
Low
No Signal
2. CHANNEL INDICATOR – Displays the current channel number. Press the Right "M►" Button on the
Receiver to switch between available cameras.
NOTE: To automatically switch between channels, press the Left "◄A" Button (AUTO).
14
Indicator
Warning
None
None
Low Signal
Low Signal
No Signal
1
2