Operation; Preparation; Checking Delivery Content; Requirements For The Installation Site - Zipper Mowers ZI-STE2000IV User Manual

Transport of the machine in a vehicle:
Check that no fuel can leak from the tank. Ensure that the fuel filler cap is tightly closed.
•
When transporting the machine in a vehicle, ensure that the machine is appropriately secured!
•
The machine must be carried and transported in an upright position to avoid oil or fuel leakage.
If the machine is in a vehicle, do not start the engine. Take the machine out of the vehicle and
•
run it outdoors only.
• Protect the machine from excessive heat during transport. If the machine remains in a closed
vehicle for a long time, the fuel may ignite due to overheating.
13

OPERATION

Only operate the machine when it is in perfect condition. Before each operation, a visual inspection of
the machine must be carried out.
13.1

Preparation

13.1.1

Checking delivery content

Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must also
be noted immediately on the delivery note in accordance with the provisions of the warranty, otherwise
the goods are deemed to have been properly accepted.
13.1.2

Requirements for the installation site

Place the machine on a level, solid surface to prevent the machine from tipping over.
When dimensioning the required space, take into account that the operation must be possible without
restrictions at all times.
13.2

Pre-operation check

13.2.1

Check engine oil level

A too low oil level will damage the engine and shorten the life of the machine. Therefore,
check the engine oil level before every start and top up the engine oil if necessary.
NOTE:
Engine does not start with low oil (low oil alarm lights up).
See capture maintenance => engine oil change.
13.2.2

Check fuel tank level

Observe the safety regulations for fuel control. Filter the fuel during refuelling to prevent
foreign particles from entering the combustion chamber. Wipe up leaked fuel.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
N O TE
The machine is delivered without engine oil and fuel!
Engine oil 15W40 must be filled before first use!
N O TE
N O TE
WAR N I N G
Never refuel if the engine is running
OPERATION
34
ZI-STE2000IV