Assembling Basic Fixture - ETC Source Four Assembly Manual

Hide thumbs Also See for Source Four:

Table of Contents

A s s e m b l i n g b a s i c f i x t u r e

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

Step 7:

Step 8:

Step 9:

Step 10: Lock the clip by pushing sideways while gently pushing it forward.

All manuals and user guides at all-guides.com

Follow instructions under

Assemble Lens Tubes following the instructions for your applicable lens degree

application.

Insert lens tube assembly (8-16) fully into the front barrel assembly (6-7). Align

the mounting hole with the slot and secure with knob (17). See

Install reflector housing (2-5) onto front barrel assembly (6-7) and align the two

mounting holes. Secure with screw (19) on top, and knob (17) on bottom. Tighten

both securely. See

Figure

Install the lamp socket assembly (1) to the reflector housing (2-5) and secure with

brass knurled screw on rear of lamp socket assembly.

Release the gel retaining clip by pushing it sideways while gently pulling

backwards.

Insert the color frame.

Assembling lamp socket, page

Reflector Housing Assembly, page

Shuttle Barrel Assembly, page

11.

Figure

Source Four Assembly Guide

Table of Contents

Need help?

Do you have a question about the Source Four and is the answer not in the manual?