50° Basic Fixture; Assembling Basic Fixture - ETC source four zoom Assembly Manual

25°-50° Basic Fixture
5
Reference
Number
1
2
3
4
5
6
7
A s s e m b l i n g B a s i c F i x t u r e
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
2
7
3
2
Part Description
Number
7060A2032 25°-50° lens tube
7060A2020 Reflector housing assembly, double clutch
7060A2008 Lamp socket assembly
7060A4008-01 Knob set with male insert
7060A4037 Handle, insulated rear
HW5197 Screw, 1/4-20 x 5/8, black zinc
HW2181 Screw, 6-32 x 3/4, black Taptite
Follow instructions under
Follow instructions under
Follow instructions under
Follow instructions under
Insert lens tube assembly (1) fully into the reflector housing assembly (2). Turn
lens tube assembly 1/4 turn and align the two mounting holes. Secure with screw
(6) on top, and knob (4) on bottom. Tighten both securely. See
2.
Install the lamp socket assembly (3) to the reflector housing (2) and secure with
brass knurled screw on rear of lamp socket assembly.
Release the gel retaining clip by pushing it sideways while gently pulling
backwards.
Insert the color frame.
Lock the clip by pushing sideways while gently pushing it forward.
6
4
Assemble lamp socket, page
Installing reflector, page
Assemble front barrel assembly, page 10
Assemble lens tube (15°-30° and 25°-50°), page
1
Figure 2
Quantity
Required
4.
8.
Figure 1 or
Source Four Zoom Assembly Guide
1
1
1
1
1
1
4
16.
Figure