Advertisement
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
P R O B L E M
Leakage under the
handle
The aerator has an
irregular or reduced
water flow
completely
There is a low flow of
water.
C A U S E
Bonnet nut (7) has
come loose
The aerator is dirty or
mis-fitted
Cartridge may need to
be adjusted or replaced
The filter washer in the
hose connectors is dirty.
A C T I O N
Remove the cover button (11).
Loosen set screw (10) with hex
wrench (12). Remove the
handle (9). Unscrew cap (8) (by
hand only). Tighten bonnet nut
(7) with an adjustable wrench
Remove the aerator and
check for debris.
Ensure that the rubber
washer is properly installed.
Remove the cover button (11).
Loosen set screw (10) with hex
wrench (12). Remove the
handle (9). Unscrew cap (8) (by
hand only). Tighten bonnet nut
(7) with an adjustable wrench.
Remove the cartridge (6).
Check for cracks
Turn o the water supply at
water valve and unscrew the
hose connectors from water
supply lines. Clean the filter
washer in the water lines with
hot water, removing any debris
or calcium build up
10
Advertisement
