Advertisement
STEP 8 (See Diagram 8 & Butterfly Cable Loop Diagram)
1.
Attach one end of the butterfly cable (5) to the right butterfly (J).
2.
Draw the cable underneath the pulley on the swing pulley bracket (15).
3.
Secure it with two pulley covers (50), one M10*50 (35), two Ф10 washers (44), and one
M10 lock nut (47).
4.
Draw the cable underneath the pulley then upward to the angled double floating pulley
bracket (AA) previously installed in STEP 7. Repeat procedure 3 above toinstall a pulley and
two pulley covers.
Draw the cable around the pulley then downward to the left open bracket on the swing pulley
5.
bracket (15).
6.
Attach the end of the cable to the left butterfly (K).
7.
Attach the butterfly base cover (U) to the butterfly base (N) to cover the left and right pivot
on the butterfly base. Secure the cover to the pivots with two M10*20 bolts (34).
8.
Align the holes and secure the cover to the butterfly base with two M10*90 bolts (40), four
Ф10 washers (44), and two M10 lock nuts (47).
21
Advertisement
