STEP 4 (See Diagram 4)
1. Attach the seat pad (2) to the seat post (F). Secure it with four M6*16 bolts (32) and four Ф6
big washers (42).
2. Insert the seat post (F) into the opening on the seat support frame (G). Thread the lock knob (9)
into the hole on the seat support frame (G) to lock the seat pad (2) at selected height.
3. Insert the foam tube (W) halfway through the hole on the leg developer (H). Push two foam
rollers (3) onto the foam tube from both ends.
12
DIAGRAM 4