View Open Source Software License; Time And Date; Synchronize Time Manually; Set Ntp Server - HIKVISION DS-2TXS2628-3P/QA/GLT/CH30S80 Manual

2. Choose one method to upgrade.
Firmware
Firmware Directory
3. Click Browse to select the upgrade file.
4. Click Upgrade.

12.8 View Open Source Software License

Go to Configuration → System → System Settings → About, and click View Licenses.

12.9 Time and Date

You can configure time and date of the device by configuring time zone, time synchronization and
Daylight Saving Time (DST).

12.9.1 Synchronize Time Manually

Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click Manual Time Sync..
4. Choose one time synchronization method.
– Select Set Time, and manually input or select date and time from the pop-up calendar.
Check Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.

12.9.2 Set NTP Server

You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port and Interval.
Thermal & Optical Bi-spectrum Network Camera
Locate the exact path of the upgrade file.
Locate the directory which the upgrade file belongs to.
70