Capture Configuration; Capture Automatically; Capture Manually - HIKVISION DS-2TXS2628-3P/QA/GLT/CH30S80 Manual

Note
Go to Configuration → Local, click Save downloaded files to to change the saving path of
downloaded video files.

10.3 Capture Configuration

The device can capture the pictures manually or automatically and save them in configured saving
path. You can view and download the snapshots.

10.3.1 Capture Automatically

This function can capture pictures automatically during configured time periods.
Before You Start
If event-triggered capture is required, you should configure related linkage methods in event
settings. Refer to Event and Alarm for event settings.
Steps
1. Go to Configuration → Storage → Schedule Settings → Capture → Capture Parameters.
2. Set the capture type.
Timing
Capture a picture at the configured time interval.
Event-Triggered
Capture a picture when an event is triggered.
3. Set the Format, Resolution, Quality, Interval, and Capture Number.
4. Refer to Set Arming Schedule for configuring schedule time.
5. Click Save.

10.3.2 Capture Manually

Steps
1. Go to Configuration → Local.
2. Set the Image Format and saving path to for snapshots.
JPEG
The picture size of this format is comparatively small, which is better for network
transmission.
BMP
The picture is compressed with good quality.
Thermal & Optical Bi-spectrum Network Camera
54