Set Shielded Region; Manual Thermography - HIKVISION DS-2TXS2628-3P/QA/GLT/CH30S80 Manual

3.3.8 Set Shielded Region

You can configure areas from being detected.
Steps
1. Check Enable Shield Area.
2. Click .
3. Drag the mouse in the live view to draw the area. You can drag the corners of the red rectangle
area to change its shape and size.
4. Right click the mouse to stop drawing.
5. Optional: Select one area and click
6. Click Save.

3.4 Manual Thermography

After enable the manual thermography function of the device, you can click any position on the
live view to show the real temperature.
Steps
1. Go to Configuration → Local and select Display Temperature Info. as Yes.
2. Go to Configuration → Temperature Measurement → Basic Settings.
3. Check Enable Temperature Measurement.
4. Click Save.
5. Go to live view interface and select thermal channel, click
interface to show the real temperature.
Thermal & Optical Bi-spectrum Network Camera
to delete it.
13
. Click any position on the