Table of Contents
Advertisement
8.1.5 View Previous/Next Page
When the number of channels surpasses that of live view window division, this function can switch
live view among multiple channels.
Click
to switch live view among multiple channels.
8.1.6 Full Screen
This function is used to view the image in full screen mode.
Click
to start full screen mode and press ESC button to exit.
8.1.7 Light
Click
to turn on or turn off the illuminator.
8.1.8 Wiper
For the device that has a wiper, you can control the wiper via web browser.
Click
on live view page. The wiper wipes the window one time.
8.1.9 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Click
to operate lens initialization.
8.1.10 Auxiliary Focus
Click
to realize automatic focus. This function is subject to the actual device model.
8.1.11 Quick Set Live View
It offers a quick setup of PTZ, display settings, OSD, video/audio and VCA resource settings on live
view page.
Steps
1. Click
to show quick setup page.
2. Set PTZ, display settings, OSD, video/audio and VCA resource parameters.
– For PTZ settings, see Lens Parameters Adjustment .
– For display settings, see Display Settings.
– For OSD settings, see OSD.
– For audio and video settings, see Video and Audio.
Thermal & Optical Bi-spectrum Network Camera
32
Advertisement
Table of Contents
