Table of Contents
Advertisement
9.2.16 Enhance Regional Image
You can select the desired area of image to improve the coding quality. The regional image will be
more detailed and clear.
Steps
1. Go to Configuration → Image → Display Settings → Image Enhancement.
2. Select the area of regional image enhancement. You can select OFF to disable this function, or
select Custom Area to draw a desired area.
A red rectangle shows on the display, in which the image quality is improved.
9.2.17 Mirror
When the live view image is the reverse of the actual scene, this function helps to display the
image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the function is enabled.
9.2.18 Video Standard
Video standard is an ability of a video card or video display device that defines the amount of
colors that are shown and the resolution. The two most common video standard used are NTSC
and PAL. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual
scan lines. In PAL, 25 frames are transmitted each second. Each frame is made up of 625 individual
scan lines. Select video signal standard according to the video system in your country/region.
9.2.19 Digital Zoom
You can zoom in the image. The larger the zoom size is, the more blurred the image is.
9.2.20 Scene Mode
There are several sets of image parameters predefined for different installation environments.
Select a scene according to the actual installation environment to speed up the display settings.
9.2.21 Local Output
Enter a short description of your concept here (optional).
Some camera models support CVBS, SDI, or HDMI output. Set the local output ON or OFF
according to the actual device. This is the start of your concept.
Thermal & Optical Bi-spectrum Network Camera
46
Advertisement
Table of Contents
