Demo (Simulation); Set A Destination - Aston Martin DB 9 2007 Manual

Demo (Simulation)

(Settings > Start demo)
The demo illustrates how the system works
when the vehicle is stationary by simulating a
trip to a specified destination. All settings can
be made during the demonstration. <Stop
demo> interrupts the simulation.
A destination must be entered for the demo
to work.
10.12

Set a Destination

The Navigation system requires a destination
to be entered so that a route to the
destination can then be calculated. Various
destination options are available.
If the screen is in map view press
access the main menu.
Once a valid destination has been entered
<Start Guide> will be available (Refer to
'Guidance', page 10.27).
Various destinations can be entered and
saved as an itinerary (Refer to 'Itinerary', page
10.26).
Specify an Address
Select State
to
(Set Destination > Address)
Move Up / Down to select <State> and
press .
Press Right when an arrow is displayed on
the right of the line. A list of the five last
entered States / Cities will be displayed.
Select the required State / City, if available,
from the list and press .
Use Navigator to spell out the desired state
from the Character table. Press for
each letter.
When there are no more alternatives, the
system fills in the remaining letters itself).
A list of the first three states matching that
letter combination is shown at the bottom of
the screen. A scroll bar on the right-hand side
indicates that there are several alternatives in
the list.