Subscribe to Our Youtube Channel
Related Manuals for inVENTer aV160 ALD
Summary of Contents for inVENTer aV160 ALD
- Page 1 Operating and cleaning instructions aV ALD ventilation device without heat recovery www.inventer.de...
-
Page 2: Table Of Contents
The same functionality is ensured despite any design deviations. Annex 1: Cleaning log ......................24 This documentation is updated regularly. Necessary corrections and appropriate supplements are always included in subsequent editions. You can find the latest version at www.inventer.de/ downloads. Company information... -
Page 3: User And Safety Instructions
User and safety instructions Safety instructions Thank you for purchasing this high-quality product from inVENTer! These operating and cleaning instructions are part of your ventilation system and must be perma- nently available. When handing the equipment / system to a third party, the operating and clean- This section provides an overview of the basic safety precautions for safe and proper operation ing instructions have must be handed over also. -
Page 4: System Overview: Av Ald Ventilation Device
Flex weather protection hood (white/grey/anthracite/custom colour/North). A sound insulation lining, available with the aV160 ALD and aV200 ALD, is an integral part of the • Standard variant: aV200 ALD ventilation devices (referred to in the further text as "Standard") device. -
Page 5: Construction
The air volume is regulated via the lower part of the inner cover. There is a mechanism for chang- ing the opening angle. aV ALD Extract air area Supply air Extract air area area Figure 1: Example: aV160 ALD Plus ventilation device aV ALD aV ALD Supply air Supply air Ventilation device Inner cover Wall sleeve... -
Page 6: Operation
OPERATION CLEANING AND CARE Operation Flair Zero ALD inner cover Requirement: The ventilation system can be opened or closed via the inner cover. • The cover is fitted and open. For the ventilation device to function correctly, the inner cover of your ventilation device must be Closing the inner cover: open. - Page 7 Cleaning recommendations Brief summary of cleaning The measures and intervals listed here are recommended by inVENTer GmbH to maintain the To clean and check the components of the ventilation device, first remove the inner cover panel. functionality and performance of the aV ALD ventilation devices.
-
Page 8: Cleaning / Replacing The Dust Filter
ALD 100 / Light ALD inner cover Once the filter has been removed, access to the wall sleeve (aV100 ALD) and/or sound insulation lining (aV160 ALD) is clear. Before the dust filter and filter cartridge are inserted again, wipe out the wall sleeve ►... -
Page 9: Clean The Sound Insulation Lining And Inventin
® ► Pull the inner cover panel forwards. The sound insulation lining is part of the aV160 ALD. On the aV200 ALD, Inventin is also in- stalled in addition to the sound insulation lining. Disengage all spacers. -
Page 10: Attaching The Inner Cover Panel
► Fold the lower area onto the casing. mats! • Clean the sound insulation lining and Inventin carefully. The inVENTer logo is located at the bottom ® right. ► Clean the sound insulation lining and Inventin ® with... -
Page 11: Accessories And Spare Parts
1505-0068 Article numbers of the exterior closure variants in the separate installation instructions of the respective exterior cover only with aV160 ALD and aV200 ALD Special variant: consisting of aluminium, with increased salt resistance aV ALD ventilation device | Operating and cleaning instructions... -
Page 12: Disposal
The products described in these operating instructions contain valuable materials which can be recovered and recycled. The separation of waste materials into inVENTer GmbH provides a five-year warranty for the wall sleeve. This covers premature product different varieties facilitates recovery of the recyclable materials. Contact an elec- wear. -
Page 13: Annex 1: Cleaning Log
ANNEX 1: CLEANING LOG NOTES Annex 1: Cleaning log We recommend documenting the cleaning measures carried out in the following table. Recommendations on the cleaning intervals can be found in section 4: Cleaning and care - Cleaning recommendations. Num- ber of Cleaning/control Name/ Date... - Page 14 GmbH Ortsstraße 4a 07751 Löberschütz Germany www.inventer.de Subject to modifications. No liability for printing errors. Item number: 5012-0017 Version: 1.0 – 11/2022...
Need help?
Do you have a question about the aV160 ALD and is the answer not in the manual?
Questions and answers