Manufacturer's Warranty; Declaration Of Conformity - STEINEL IS 180 digi Instructions Manual

Unit does not switch OFF.
– Continued movement within the detection zone.
• Check detection zone.
• If necessary, limit or change detection zone.
Unit switches ON when it should not
– Movement within the detection zone, e.g. from
animals, trees or cars.
• Check detection zone.
• If necessary, limit or change detection zone.
– Unit is moving as a result of gusts of wind or
precipitation.
• Mount floodlight on a firm surface.
No connection being set up to sensor switch
from smartphone or tablet.
– Smartphone too close to sensor switch.
• Distance from sensor switch at least 1.5 m.
– The app is not compatible with the smartphone
or tablet.
• Use different smartphone or tablet.
– App version not up to date.
• Update Steinel Connect app in the app store.
No connection with the app.
– No network key on the smartphone or tablet that
is being used.
• Share network key via app.
9. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environ-
mentally compatible manner.
Do not dispose of electrical
and electronic equipment as
domestic waste.
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic
equipment no longer suitable for use must be
collected separately and recycled in an environ-
mentally compatible manner.

10. Declaration of Conformity

STEINEL Vertrieb GmbH hereby declares that the
IS 180 digi sensor switch conforms to Directive
2014/53/EU. The full wording of the EU Declaration
of Conformity is available for downloading from the
following Internet address: www.steinel.de

11. Manufacturer's warranty

This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
STEINEL guarantees that it is in perfect condition
and proper working order. The warranty period is
36 months and starts on the date of sale to the
consumer. We will remedy defects caused by
material flaws or manufacturing faults. The warranty
will be met by repair or replacement of defective
parts at our own discretion. The warranty shall not
cover damage to wear parts, damage or defects
caused by improper treatment or maintenance.
Further consequential damage to other objects
shall be excluded.
Claims under the warranty will only be accepted
if the unit is sent fully assembled and well-packed
with a brief description of the fault, a receipt or
invoice ( date of purchase and dealer's stamp ) to
the appropriate Service Centre.
Repair service:
If defects occur outside the warranty period or
are not covered by the warranty, ask your nearest
service station for the possibility of repair.
G B
1 3
Y E A R
MANUFACTURER'S
WARRANTY
– 13 –
5
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
GB