Table of Contents
Advertisement
Chapter 1. Introduction
SERIP-100 is a serial to Ethernet interface converter. The unit enables serial devices to
connect to an IP-based Ethernet LAN.
The SERIP-100 receives data on the serial port, converts the data stream into either a
TCP or UDP packet and transmits the packet via the Ethernet network. Vice versa, data
contained in packets received on the network interface are transmitted on the serial port.
Two SERIP-100 operating in UDP tunneling mode can be used to overcome the length
limitation of RS-232 and to connect two serial devices utilizing IP network infrastructure.
UMSERIP100-2201
Introduction
1
Advertisement
Table of Contents
