Settings Pane; Serip Com Manager Settings Pane - Proconx SERIP-100 User Manual

IDLE
The redirector has been started and is ready for a connection request.
Starting
The redirector is in the process of starting up.
Connecting
The redirector process has been started and tries to establish a connection with
the SERIP-100 device server.
ERROR
An error within the redirector process occurred. Check the status line for more
details about the error.
IP Address
Lists the IP address to be used for a connection if in client mode or the IP address of
the connected client if in server mode.
Start Redirector
Starts the redirector process. Once started, the virtual COM port is connected with
the serial device server.
Start Redirector
Stops the redirector process and closes the TCP/IP connection with the serial device
server.
Automatically start Redirector
Check this box if the redirector process shall be started without user intervention
upon launch of the SERIP COM Manager.

Settings pane

Below is a sample window of the SERIP COM Manager settings pane.
Figure 6.4: SERIP COM Manager settings pane
42
UMSERIP100-2201