Table of Contents
Advertisement
Right-click on the system tray icon to open the SERIP COM Manager context menu:
The context menu allows the main window of the SERIP COM Manager to be shown
using the Open command. The Shutdown command closes all TCP/IP connections with
serial device servers and terminates the SERIP COM Manager application. The Start and
Stop commands can be used to selectively start and stop a COM port redirector process
without opening main window.
Shutting down the SERIP COM Manager disconnects all serial device servers!
SERIP COM Manager user interface
The main window of the SERIP COM Manager is shown below. It can be opened from
the system tray icon's context menu.
Figure 6.2: SERIP COM Manager main window
The COM port pane on the left side of the main window shows all installed virtual COM
ports. The currently selected COM port is highlighted. A coloured triangle at the bottom
right corner of the COM port icon indicates the status of redirector process. Red indicates
stopped, yellow indicates connecting or idle state and green indicates connected state.
40
UMSERIP100-2201
Advertisement
Table of Contents
