Table of Contents
Advertisement
Figure 5.12: Backup/Restore page
To store the configuration settings on your PC, click on the Configuration sub-menu
and then click on the Backup/Restore menu entry. Then click on Backup. Your web
browser will open a file download dialog which allows you to save the configuration file
on your PC. The file name of the configuration file reflects the model name and the serial
number and has the .config extension.
In case the configuration is password protected, the username and password will
not be stored in the configuration file!
To restore the settings from a configuration file, click on the Browse button and select
a .config file matching the model of your device. Then click on Restore.
There are two options to restore a previously saved configuration set:
Restore IP Settings un-checked
Default. All but the IP settings are restored. This option is useful when device settings
shall be duplicated onto another device which will operate on the same network and
hence requires its own distinct IP settings.
Restore IP Settings checked
The complete settings are restored. This option is useful if a device is replaced with
a new device and the new device should inherit the previously set IP address.
The successful restoration of configuration settings is confirmed with the following
message:
In case of an error message, the settings may have only been partially restored and it is
important to review all the settings for correctness.
30
UMSERIP100-2201
Advertisement
Table of Contents
