Table of Contents
Advertisement
Figure 2.3: SERIP-100 in TCP Client mode configuration connecting to a server
Telnet Client mode
The Telnet Client mode is similar to the TCP Client mode but offers in addition support
for the Telnet protocol. This means all characters received or transmitted on the TCP
connection are encoded with the Telnet protocol. This mode is also known as reverse
Telnet.
Client/Server operation
Two SERIP-100 can be combined using the TCP protocol while one is working in server
mode and the other peer in client mode. Client/Server operation is typically used to
connect two SERIP-100 in order to extend the range of a RS-232 link.
8
Server
TCP
Eth
UMSERIP100-2201
Advertisement
Table of Contents
