Table of Contents
Advertisement
On the right hand side of the main window a tabbed pane shows the current redirector
status, redirector configuration information and the web interface of the remote device
server.
You can use the
currently selected port.
A port can only be deleted if the associated redirector process is in STOPPED state!
With a right mouse click on a COM port a context menu can be opened. From the context
menu a virtual COM port can be started, stopped or removed:
Status pane
The status of a serial port redirector process can be monitored on the status pane.
Figure 6.3: SERIP COM Manager status pane
Redirector State
Can be any of these states:
STOPPED
The redirector process has not been started. Click Start Redirector to start.
CONNECTED
The redirector process has been started and a successful connection to the
SERIP-100 device server has been established.
UMSERIP100-2201
toolbar button to add a new virtual COM port or
Virtual COM port redirector
to delete the
41
Advertisement
Table of Contents
