19501 Series Fixture B195000/B195001/B195002 Quick Start Guide
3.
Using B195000 EMI Shielding Can
3.1
Standard Item and Accessory
EMI Shielding Can for Partial
Discharge Tester
Green and yellow
twisted ground wire
L:100mm
1pcs
Note
Please specify the name when an additional item is required.
3.2
Installation
To install the EMI shielding can on the high voltage module of 19501
series partial discharge tester, use the shielding can fixed screws (M4*8
umbrella head) came along with the fixture to secure it as the figure
shown below.
Standard Item
Standard Accessory (Wire & Screw)
Cover fixed screw
M4*8mm
Partial Discharge Tester
2pcs
Supporter
Cover ground screw
M4*8mm
1pcs
3