Configure Frame; Configure Hardware; Configure Low Capacity - Agilent Technologies ESG Series User And Programming Manual

ESG Family Signal Generators
Options UN8 and 202
Configure Frame
Pressing this softkey displays a menu of softkeys where you can control
the entire selected frame. These frame-wide functions include scramble
operating state, scramble seed data, secondary frame operating state,
recalling and saving secondary frame states, and secondary frame state
triggering options.
Softkey Location:
Data Format Pattern Framed
Configure Hardware
Pressing this softkey reveals a menu where you can select a particular
hardware configuration.
Softkey Locations
Custom:
Other Formats:
Configure Low Capacity
Pressing this softkey displays a menu of softkeys where you can
configure a timeslot as a low capacity burst. The following figure shows
an example of a radio fixed part low capacity timeslot. The portable
part low capacity timeslot is identical except for the instrument preset
values.
• G: there are two guard time fields. The grey text indicates that you
• P: shows the contents (AAA) of the 16-bit preamble field. The grey
Real-Time I/Q Baseband Generator User's and Programming Guide
Mode
>
Mode Custom
>
Mode
cannot change the contents of these fields.
text indicates that you cannot change the contents of this field.
> >
desired format
TDMA
>
Configure Timeslots
>
Configure Hardware
>
TDMA desired format
Softkey Reference
>
>
Configure Frame
>
Configure Hardware
C
3-45