Table of Contents
Advertisement
Changing the Paper Width
You can change the paper width from 80 mm to 58 mm by installing the roll paper guide. Follow the steps below
to change the paper width.
1
Turn off the product.
2
Open the roll paper cover.
3
Install the roll paper guide so that the protrusion on the roll paper holder is aligned
with the hole on the printer.
4
Install the roll paper correctly.
5
Close the roll paper cover.
Hole
Protrusion
You can use the enclosed screw to fix the roll paper guide.
Do not return the product to 80 mm after using it at 58 mm. The section of the print head that did
not touch paper may have rubbed against the platen roller and become damaged, or the autocut-
ter blade may be worn down. You need to set with the memory switch (customized values) for the
paper width in Software Setting mode. For details see
Chapter 2 Setup
"Software Settings" on page
41.
2
24
Advertisement
Table of Contents
