Epson TM-T88VI-DT2 Technical Reference Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. TM-T88VI-DT2
  6. Technical reference manual

Epson TM-T88VI-DT2 Technical Reference Manual

Hide thumbs Also See for TM-T88VI-DT2:
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Reference Guide
Product Overview
Describes features of the product.
Setup
Describes setup for the product and peripheral devices
necessary before using this product.
Printer Functions and Settings
Describes the printer functions and setting items.
Windows Settings
Describes the pre-installed Widows settings and
specifications.
TM-DT Software System Development
Describes the requirements for system development using
TM-DT software.
PC-POS System Development
Describes information necessary for developing a PC-POS
system.
Handling
Describes how to handle the product.
Replacement of the TM-T88V-DT
Describes how to replace the TM-T88V-DT.
Product Specifications
Describes this product's specifications.
M00112401
Rev. B

Advertisement

Table of Contents
loading

Related Manuals for Epson TM-T88VI-DT2

Summary of Contents for Epson TM-T88VI-DT2

  • Page 1 Technical Reference Guide Product Overview Describes features of the product. Setup Describes setup for the product and peripheral devices necessary before using this product. Printer Functions and Settings Describes the printer functions and setting items. Windows Settings Describes the pre-installed Widows settings and specifications.
  • Page 2 • Neither is any liability assumed for damages resulting from the use of the information contained herein. • Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and...

  • Page 3: For Safety

    For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. You must follow warnings carefully to avoid serious bodily injury. WARNING Provides information that must be observed to prevent damage to the equipment or loss of data. •...

  • Page 4: Warnings

    Warnings • If this product produces smoke, a strange odor, or unusual noise, immediately unplug the AC cable, and contact qualified service personnel. Continued use may lead to fire or electric shock. • Do not use this product with any voltage other than the specified one. Doing so may lead to fire WARNING or electric shock.

  • Page 5: Cautions

    Cautions • Do not use this product in locations subject to high humidity or dust levels. Excessive humidity and dust may cause paper jams and other problems, such as fire, or electric shock. • Be sure to set this product on a firm, stable, horizontal surface. The product may break or cause CAUTION injury if it falls.

  • Page 6: Restriction Of Use

    Open Source Software License This product uses open source software in addition to Epson proprietary software. For information of the open source software used in this product, see the following URL.

  • Page 7: About This Manual

    About this Manual Aim of the Manual This manual provides developers/engineers with all the necessary information for design, development and installation of a POS system, and also design and development of a printer application. Manual Content The manual is made up of the following sections: Chapter 1 Product Overview Chapter 2...

  • Page 8: Table Of Contents

    Contents ■ For Safety..........................3 Key to Symbols..................................3 Warnings ....................................4 Cautions....................................5 ■ Caution Labels .........................5 ■ Restriction of Use ........................6 ■ Open Source Software License.....................6 ■ About this Manual ........................7 Aim of the Manual ................................7 Manual Content .................................. 7 ■...
  • Page 9 Setup .......................21 ■ Flow of Setup ........................21 ■ Installing the Printer......................22 ■ Connecting the AC Adapter ....................23 ■ Changing the Paper Width ....................24 ■ Adjusting the Paper Roll Near-End Sensor..............25 ■ Connecting the LAN ......................26 ■...
  • Page 10 Controlling POS Peripherals from Web Applications ..................75 Controlling POS Peripherals from Socket Communication Compatible Applications......76 Web Server ..................................77 ■ TM-DT Software Settings....................79 Starting EPSON TMNet WebConfig..........................79 Help Screen Display.................................79 Version Screen Display ..............................79 Updating TM-DT Software ............................79 Information - Current status............................80 Information - System settings - Network.........................81...
  • Page 11 Settings - Web service settings - Print Settings - Spooler..................88 Settings - Web Service settings - Web Content - Update settings..............89 Settings - Web service settings - Server access - Direct Print ................90 Settings - Web Service settings - Server access - Status notification.............91 Settings - Web Service settings - Server access - Device Data Notification ..........92 Settings - System settings - Network - TCP/IP......................93 Settings - System settings - Network - SSL......................93...
  • Page 12 Handling ...................... 112 ■ Turning Power On/Off ....................... 112 Functions of the Power button ..........................113 ■ Installing and Replacing Roll Paper................114 ■ Removing Jammed Paper ....................117 ■ If Roll Paper Cover does not Open .................. 118 ■ Changing the orientation of the display ............... 119 ■...
  • Page 13 ■ Power supply capacity for external devices..............136 ■ Environmental Conditions ....................137 ■ Reliability..........................138 ■ External Dimensions ......................139 ■ AC Adapter Specifications ....................142 ■ Interface..........................143 USB 3.0 port..................................143 USB 2.0 port (Type A) ..............................144 USB 2.0 port (Type-C) ..............................

  • Page 14: Product Overview

    Chapter 1 Product Overview Product Overview This chapter describes features of the product. Features This product is a compact POS terminal equipped with a printer. Features of the POS Terminal (Controller) This controller has the following features. Hardware • CPU: Uses an Intel® Core™ i5, Core™ i3, or Celeron® processor •...

  • Page 15: Product Configurations

    • Product warranty (differs depending on the destination) Options • Windows10 Recovery DVD (OT-RD01): Windows model • SSD module (OT-SS032 (32 GB), OT-SS064 (64 GB), OT-SS128 (128 GB), OT-SS256 (256 GB)) • Dedicated customer display (DM-D110 for TM-T88V-DT/ TM-T88VI-DT2) • Customer display (DM-D30) • Affixing tape (DF-10)

  • Page 16: Part Names And Functions

    Chapter 1 Product Overview Part Names and Functions Roll paper cover Open this cover to install/replace the roll paper. Manual cutter Use this cutter when you cut the roll paper manually. Open this cover to unlock the autocutter blade when the roll paper cover does not Cutter cover open due to a paper jam.
  • Page 17 Chapter 1 Product Overview Controller LED This displays the controller status. (1) Storage Access LED (2) Status LED (Orange) (3) Status LED (Blue) Product status (Blue) Flashing Starting up (Approx. 1 second intervals) Updating software Power on (Normal) Flashing Sleep (Approx.
  • Page 18 Chapter 1 Product Overview Printer LED This displays the printer status. For details see "Status and Errors" on page 37. LED status Description Power on (Power) LED (Blue) Power off Offline (Error) LED (Orange) Flashing Error has occurred Normal Roll paper near-end (Paper) LED (Orange) Flashing Waiting to continue self-test printing...

  • Page 19: Interface

    Chapter 1 Product Overview Interface The ports and connectors on the product rear. Drawer kick connector Connect the cash drawer here. Serial port (COM1) Connect a serial communication device. HDMI port Connects an HDMI-supported device, such as a display. Connect external devices with USB interface here. USB3.0 ports (Type A) Supports USB 3.0 and can connect up to 6 devices.
  • Page 20 Chapter 1 Product Overview LAN Status LED The LAN status LEDs are the LEDs on the Ethernet port. They indicate the network communication status of this product. Status of LED Description Active/Link ON (Green) Link is established correctly Flashing (Green) Data transmission / reception Speed ON (Green)

  • Page 21: Setup

    Chapter 2 Setup Setup This chapter explains how to install this product, connect peripheral devices, options, and accessories, and perform the test print. The settings and necessary software for this product and peripheral devices vary depending on the system in use. This information is explained in the "TM-DT Software System Development" and "PC-POS"...

  • Page 22: Installing The Printer

    Chapter 2 Setup Installing the Printer Install the product horizontally on a firm, stable surface. The security hook on the back of the product allows you to attach a commercially available antitheft wire. Security hook Important Notes on • The printer must be installed horizontally on a flat surface (not tilted). •...

  • Page 23: Connecting The Ac Adapter

    Chapter 2 Setup Connecting the AC Adapter Follow the steps below to connect the AC adapter. Be sure to use the specified AC adapter [AC Adapter, T1(Model: M284B)] only. WARNING Be sure to leave a space between the AC adapter and the main unit. Firmly insert the DC connector of the AC adapter all the way into the DC-in connector on the product.

  • Page 24: Changing The Paper Width

    Chapter 2 Setup Changing the Paper Width You can change the paper width from 80 mm to 58 mm by installing the roll paper guide. Follow the steps below to change the paper width. Turn off the product. Open the roll paper cover. Install the roll paper guide so that the protrusion on the roll paper holder is aligned with the hole on the printer.

  • Page 25: Adjusting The Paper Roll Near-End Sensor

    Chapter 2 Setup Adjusting the Paper Roll Near-End Sensor Below are two situations where a roll paper NE sensor adjustment is required. • To adjust the detection position to suit the diameter of the roll paper core used. • To adjust the detection position of remaining amount of paper. •...

  • Page 26: Connecting The Lan

    Connect the LAN cable to the Ethernet port. (See "Interface" on page 19.) Network settings such as the IP address are set using the TM-T88VI-DT2 Utility or TMNet WebConfig. Attaching the Customer Display For the method to use dedicated customer display (DM-D110 for TM-T88V-DT/ TM-T88VI-DT2), see the “DM-D110/ DM-D210 Technical Reference Guide”.

  • Page 27: Connecting The Cash Drawer

    Chapter 2 Setup Connecting the Cash Drawer Connect the connector of the drawer kick cable to the printer. Push the connector of the drawer kick cable into the product until you hear a click. Drawer kick connector • Specifications of drawers differ a great deal, depending on makers or models. When you use a drawer other than the specified, make sure its specifications meet the following conditions.
  • Page 28 Chapter 2 Setup Drawer kick Connector Circuitry Shielded drawer kick connector Drawer kick solenoid +24 V Control device Drawer open/close switch Printer side User side [Drawer kick side]...

  • Page 29: Connecting External Devices

    Connect the key input device to a USB port. For how to set barcode scanners and so on, see the respective prod- uct manuals. • Systems that use TM-DT software Set the device ID, control script and so on with EPSON TMNet WebConfig. For details, see "Settings - Web service settings - Key input device" on page •...

  • Page 30: Attaching/Removing The Connector Cover

    Chapter 2 Setup Attaching/Removing the Connector Cover Attaching the connector cover Be sure to hold both sides of the connector cover when attaching it, or it may become damaged. Follow the steps below to attach the connector cover to protect cables. If you use the product with the dedicated customer display (Model: DM-D110 for TM-T88V-DT/ TM- T88VI-DT2), remove the U-shaped part from the connector cover.
  • Page 31 Chapter 2 Setup Push the connector cover to click onto the main body. Make sure the cables are not pinched. You can also attach bottom cover to hide connectors.

  • Page 32: Removing The Connector Cover

    Chapter 2 Setup Removing the connector cover Push the connector cover down while pushing the lower part of the both sides of it inward to detach the hooks from the main body. If the connector cover (bottom) is attached, first remove the connector cover (bottom).

  • Page 33: Attaching The Power Button Cover

    Chapter 2 Setup Attaching the Power Button Cover Attaching the power button cover that comes with the product onto the power button prevents accidental operation of the power button. Follow the steps below to attach the power button cover. • It is recommended to clean any dirt around the power button before you attach the cover. •...

  • Page 34: Securing The Product

    Chapter 2 Setup Securing the Product Using the optional affixing tape (Model: DF-10) secures the product to the installation surface. Follow the steps below to use the affixing tape. Turn over the product so that you can see its bottom. With two pieces of the affixing tape combined, peel off the backing paper of a pair on one side, and paste it to one of the specified positions on the bottom of the product.

  • Page 35: Operating Test

    Operating Test You can confirm the connections and settings you made in the following ways. Item Tool Description Printer TM-T88VI-DT2 Utility Use the [Operation Check] to perform printing. TMNetWebConfig Use the test print to print the character string of "TEST_PRINT".

  • Page 36: Printer Functions And Settings

    Chapter 3 Printer Functions and Settings Printer Functions and Settings This chapter describes printer functions and settings. Printer Online and Offline Statuses Online The printer is online and ready for normal printing unless there is a reason to go offline. Offline The printer automatically goes offline under the following conditions: •...

  • Page 37: Status And Errors

    Chapter 3 Printer Functions and Settings Status and Errors The status of this product's printer is displayed by turning on or flashing the printer LED. Printing cannot be performed when an error occurs. Automatically Recoverable Errors Printing is no longer possible when automatically recoverable errors occur. They can be recovered easily, as described below.

  • Page 38: Unrecoverable Errors

    Chapter 3 Printer Functions and Settings Unrecoverable Errors Printing cannot be performed if an unrecoverable error occurs. If the same error occurs even after turning the power off and then on again, the device may have a failure. Contact qualified service personnel. Turn off the power immediately when unrecoverable errors occur.

  • Page 39: Status Display

    Chapter 3 Printer Functions and Settings Status Display Power LED Error LED Paper LED Online Running a self-test Waiting to continue self-test Flashing Feeding using the Feed button Roll paper cover open during error printing No paper Paper near end While updating firmware Flashing Power off standing by...

  • Page 40: Nv Memory

    This allows you to print items such as logos even if you do not transmit data from the application each time. Use the TM-T88VI-DT2 Utility to register Logo. You can confirm the registered graphics in the NV graphics information print mode.

  • Page 41: Software Settings

    Software Settings This product has a software setting function that performs various settings for the printer. You can perform set- tings using the software setting mode by operating the printer panel, or by using the TM-T88VI-DT2 Utility or TMNet WebConfig.

  • Page 42: Functions

    Chapter 3 Printer Functions and Settings Functions Automatic paper reduction Extra upper space reduction • Disabled (default setting) • Enabled Extra lower space reduction • Disabled (default setting) • Enabled Line space reduction rate • Not reduced (default setting) • Reduce 25% •...
  • Page 43 Chapter 3 Printer Functions and Settings Amount of top margin by backfeed Selectable from levels 15 ~ 2 mm (0.5 mm interval) Default setting: level 15 mm • Remove all ejected paper before printing with backfeed. • Disable the automatic top logo setting when enabling backfeed. •...
  • Page 44 Chapter 3 Printer Functions and Settings Print density Set monochrome and multi-tone, respectively. Selectable from 70% to 130% (5% increment) Default setting: 100% Depending on the paper type, it is recommended to set the print density as shown in the table below for the best print quality.

  • Page 45: Setting/Checking Modes

    Chapter 3 Printer Functions and Settings Setting/Checking Modes As well as print mode, the following modes are also provided for making various printer settings and checking items. • Self-test mode • NV graphics information print mode • Receipt Enhancement information print mode •...
  • Page 46 Chapter 3 Printer Functions and Settings 1. Continuing self-test guidance 2. Mode selection guidance Mode Selection Modes 0: Exit and Reboot Printer 1: NV Graphics Information 2: Receipt Enhancement Information 3: Customize Value Settings 4: Restore Default Values 5 or more: None Select Modes by executing following procedure.

  • Page 47: Self-Test Mode

    Chapter 3 Printer Functions and Settings Self-test Mode You can check the following items using the self-test. • Product name • Firmware version • Product serial number • Resident fonts • Maintenance counter information (head running length, number of times of autocutting) Follow the steps below.

  • Page 48: Nv Graphics Information Print Mode

    Chapter 3 Printer Functions and Settings NV Graphics Information Print Mode Prints the following NV graphic information registered to the printer. • Capacity of the NV graphics • Used capacity of the NV graphics • Unused capacity of the NV graphics •...

  • Page 49: Software Setting Mode

    Chapter 3 Printer Functions and Settings Software Setting Mode Set the printer's memory switches and customized values. • Print density • Auto reduction of amount of paper to use • Enabling/disabling paper autocutting at cover close • Paper width setting •...
  • Page 50 Chapter 3 Printer Functions and Settings After briefly pressing the Feed button (less than one second) for the number of times shown in the print result, hold down the button for more than one second to select the setting items. The setting selected as the setting item, the current settings and default settings are printed.

  • Page 51: Restore Default Values Mode

    Chapter 3 Printer Functions and Settings Restore Default Values Mode In Restore default values mode, following values saved on NV Memory will be set back to default settings. When any error occurs, you can use to specify the reason. Restore Default Values Setting Contents Setting Items and Delete Defined Data...

  • Page 52: Hexadecimal Dumping Mode

    Chapter 3 Printer Functions and Settings Hexadecimal Dumping Mode In hexadecimal dumping mode, data from the host device is printed in hexadecimal numbers and characters. By comparing the print outs and the program, you can check whether or not data is being sent to the printer correctly.

  • Page 53: Windows Settings

    DVD. When the log-on screen appears, enter the password. For the initial settings, the user name is "EPSON-USER" and the password is "T88VI-DT2". The Windows desktop is displayed. Select [Start], then [Control Panel], and [Date and Time]. The "Date and Time Properties" window is displayed. Set the date, time, and the time zone.

  • Page 54: Enabling Or Disabling Epos-Device

    ∗ TMNet WebConfig ∗ Store/restore settings of this product • You will no longer be able to call TMNet WebConfig from the TM-T88VI-DT2 Utility. Speaker Volume Setting Volume of the speakers equipped in this product can be adjusted using the speaker volume adjustment function...

  • Page 55: Windows Recovery

    Do not operate the keyboard or mouse while the Windows setup screen is displayed. When the log-on screen is displayed, enter the password. The initial user name is “EPSON-USER”, and the initial password is "T88VI-DT2". Select [Start]-[Settings]-[Time & language], and the [Date and Time] is displayed.

  • Page 56: Specification

    Intel Serial IO Driver GPIO Driver Realtek PCIe GBE Family Controller Realtek High Definition Audio ® intel rapid_storage_technology EPSON Advanced Printer Driver Ver.5.09 VCPdriver_Ver.2.01 Advanced Printer Driver for DM-D Ver.5.09 TM-DT Software ePOS-Device Ver.5.XX Tool EPSON TMNet WebConfig TM-T88VI-DT2 Utility...

  • Page 57: Tm-Dt Software System Development

    TM-DT Software System Development This chapter describes the information needed to develop systems that use TM-DT software. Systems that Use TM-DT software This section describes the functions of TM-DT software. Software Configuration TM-T88VI-DT2 TM-T88VI (Printer) Control program Software TM-DT Software...

  • Page 58: Network Printer Control

    Chapter 5 TM-DT Software System Development Network Printer Control A function for printing on printers on the same network and acquiring printer status is implemented in the TM-DT software. You can configure a system for controlling printers via smart device or a Web application. You can perform control from a wide range of terminals and applications compatible with SOAP/HTTP com- munications.

  • Page 59: Spooler And Forward Printing

    Chapter 5 TM-DT Software System Development Spooler and Forward Printing Spooler A spooler for saving print data and conducting background printing is implemented in the TM-DT software. Even in systems where multiple print jobs are concentrated, an application system can be configured where response is not impeded.
  • Page 60 Chapter 5 TM-DT Software System Development Devices A to C request printing of data A to C almost simultaneously. The TM-DT software saves the print data in the spooler in the order it receives it, and returns the printing results (JobID, printing result = true) to each device. Each device application completes the printing process and executes the next opera- tion.
  • Page 61 All you need to do is specify the for- warded printer in the case where printing cannot be performed to EPSON TMNet WebConfig. There is no need to resend print data.
  • Page 62 Chapter 5 TM-DT Software System Development Checking the print results When the spooler is disabled After printing, the job ID and print results are returned to the application. Also, when printing cannot be per- formed, the job ID, print results, and error code are returned. When the spooler is enabled •...
  • Page 63 Chapter 5 TM-DT Software System Development Spooler and Print Forwarding This section explains the print flow determined by whether or not the spooler or print forwarding is set for this product. Print data Printing Spooler disabled succeeded (1) Disabled Spooler Print operation setting Printing...
  • Page 64 5: When print data can be spooled, [JobID, Print result = true] is stored in the spooler. [JobID, Print result = true] is also returned to the application. 6: Make the reprint settings (number of times and interval) in EPSON TMNet WebConfig. For detail, see "Set- tings - Web service settings - Print Settings - Spooler"...

  • Page 65: Controlling For Pos Peripherals

    Device control script files control specific peripherals. Device control program files control OPOS-specification peripherals. For controllable POS peripherals, device control script files, and device control program files, see the Epson ePOS SDK and ePOS-Device XML User's Manuals, and the TM-DT Series Peripheral Device Control Guide.
  • Page 66 Chapter 5 TM-DT Software System Development Setting Items Setting Items • Enabling ePOS-Device Service Enabling / Disabling ePOS-Device Service (page • Enabling the Device Control Web service (page • Use / Do not use Customer display (page • Device ID Key input device (page •...

  • Page 67: Communication Box

    The box ID can be used by multiple applications, making it possible to easily configure a system for exchanging data between applications. The communication box can be set and used from applications compatible with Epson ePOS SDK and ePOS- Device XML.
  • Page 68 Chapter 5 TM-DT Software System Development An example for processing the data using communication box The product receive a barcode data scanned from scanner. TM-DT Software notify the barcode data to App2. App2 acquire the barcode data, then convert to POS data. App2 sends display data to communication box of TM-DT Software.

  • Page 69: System Configuration Using The Tm-Dt Software

    Chapter 5 TM-DT Software System Development System Configuration Using the TM-DT Software System Configuration • Systems that implemented application in the smart device Using Epson ePOS SDK Application • Web application system Using Epson ePOS SDK Application Browser Database • Server Direct Print system...

  • Page 70: Server Direct Print

    Chapter 5 TM-DT Software System Development Server Direct Print Server Direct Print is implemented in the TM-DT software. The function allows the TM-DT software to issue printing requests to Web server applications, conduct printing upon directly acquiring print data from the Web server, and notify the printing results to applications.
  • Page 71 Chapter 5 TM-DT Software System Development Items to be Prepared by the Customer • Web server • Application for including print data in the responses to requests from the TM-DT software Setting Items Setting Items • Enabling ePOS-Device Service Enabling / Disabling ePOS-Device Service (page •...

  • Page 72: Device Data Notification

    Chapter 5 TM-DT Software System Development Device Data Notification A device data notification function for using input data from a barcode scanner, etc. connected to this product as a trigger to receive print data or other data for controlling a device directly from the Web server and notifying the control results to the application is implemented in the TM-DT software.
  • Page 73 Chapter 5 TM-DT Software System Development Items to be Prepared by the Customer • Web server • Application for including device control data in response to requests from the TM-DT software Setting Items Setting Items • Enabling ePOS-Device Service Enabling / Disabling ePOS-Device Service (page •...

  • Page 74: Controlling Pos Peripherals From Smart Devices

    A function for controlling this product's POS peripherals and network printers from native applications of smart devices (iOS/Android /Universal Windows Apps) is implemented in the TM-DT software. Utilizing Epson ePOS SDK, you can easily configure an application system using API for controlling POS peripherals and printers. Setting Items...

  • Page 75: Controlling Pos Peripherals From Web Applications

    TM-DT software. You can also shut this product down from Web applications. Moreover, you can print images that are drawn on HTML5 Canvas from a HTML5-compatible Web browser. Using the Epson ePOS SDK for JavaScript, you can easily construct an application system by utilizing APIs for controlling POS peripherals and printers.

  • Page 76: Controlling Pos Peripherals From Socket Communication Compatible Applications

    Chapter 5 TM-DT Software System Development Controlling POS Peripherals from Socket Communication Compatible Applications A function for controlling this product's POS peripherals and network printers from applications compatible with Web services is implemented in the TM-DT software. There is no need to install drivers and plug-ins to terminals. Through using the ePOS-Device XML system, you can perform printing from various device applications com- patible with socket communications.

  • Page 77: Web Server

    Chapter 5 TM-DT Software System Development Web Server You can configure a Web server system which mounts the server-side scripting (Perl or php) Web contents on the Apache HTTP Server, which is the operating environment for the TM-DT software. You can also use the SQLite database.
  • Page 78 Chapter 5 TM-DT Software System Development • When you access to registered web contents from an input terminal and so on, the URL differs depending on the folder structure of the zip file. ➀ http://[the product’s IP address]/index.html ➁ http://[the product’s IP address]/webpage/index.html ➁...

  • Page 79: Tm-Dt Software Settings

    Starting EPSON TMNet WebConfig Start EPSON TMNet WebConfig by the following method. If ePOS-Device Service is invalid, EPSON TMNet WebConfig will not start. For details, see "Enabling or Dis- abling ePOS-Device" on page 54. Connect a display and keyboard to this product.

  • Page 80: Information - Current Status

    Chapter 5 TM-DT Software System Development Information - Current status You can check the basic settings for this product. Item Description Admin infor- Administrator name Displays the administrator name for this product. mation Installation location Displays the installation location for this product. We b s e r v i c e Web service function Displays whether the Web service function is enabled or not.

  • Page 81: Information - System Settings - Network

    Chapter 5 TM-DT Software System Development Information - System settings - Network You can check the network settings for this product. Item Description Wired LAN TCP/IP Information IP address Displays this product's IP address for a wired LAN network. Subnet Mask Displays the subnet mask.

  • Page 82: Information - System Settings - Date And Time

    Chapter 5 TM-DT Software System Development Information - System settings - Date and Time You can check this product's time settings. Item Description Date and Time Displays the time and the time zone set for this product. Automatically adjust clock for Displays whether the automatic daylight saving time adjustment function is Daylight Saving Time enabled or not.

  • Page 83: Settings - Web Service Settings - Printer

    Chapter 5 TM-DT Software System Development Settings - Web service settings - Printer Performs the settings for printers controlled by TM-DT Software. You can set the printers when you have set [Enable] under [Device control] in the "Settings - Web service set- tings - Startup settings"...

  • Page 84: Settings - Web Service Settings - Key Input Device

    Chapter 5 TM-DT Software System Development Settings - Web service settings - Key input device Performs the settings for the key input device controlled by TM-DT Software. You can set the key input devices when you have set [Enable] under [Device control] in the "Settings - Web ser- vice settings - Startup settings"...

  • Page 85: Settings - Web Service Settings - Serial Communication Device

    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Serial communication Device Performs the settings for serial communication devices controlled by TM-DT Software. You can set the serial communication devices when you have set [Enable] under [Device control] in the "Set- tings - Web service settings - Startup settings"...

  • Page 86: Settings - Web Service Settings - Other Device

    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Other Device Performs settings for other devices controlled by TM-DT Software. You can set the Other devices when you have set [Enable] under [Device control] in the "Settings - Web service settings - Startup settings"...

  • Page 87: Settings - Web Service Settings - Control Program - Device Registration

    Chapter 5 TM-DT Software System Development Settings - Web service settings - Control program - Device registration Performs settings for devices controlled by TM-DT Software. You can set the devices when you have set [Enable] under [Device control] in the "Settings - Web service settings - Startup settings"...

  • Page 88: Settings - Web Service Settings - Print Settings - Spooler

    Chapter 5 TM-DT Software System Development Settings - Web service settings - Print Settings - Spooler Performs settings for spooler and print forwarding. You can set the spooler and print forwarding when you have set [Enable] under [Spooler] in the "Settings - Web service settings - Startup settings"...

  • Page 89: Settings - Web Service Settings - Web Content - Update Settings

    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Web Content - Update settings Performs settings for the installation method and update settings for the Web content registered on this prod- uct. You can set the automatic update when you have set [Enable] under [Automatic update of web content] in the "Settings - Web service settings - Startup settings"...

  • Page 90: Settings - Web Service Settings - Server Access - Direct Print

    Chapter 5 TM-DT Software System Development Settings - Web service settings - Server access - Direct Print Performs settings for server direct print. You can set the server direct print when you have set [Enable] under [Server Direct Print] in the "Settings - Web service settings - Startup settings"...

  • Page 91: Settings - Web Service Settings - Server Access - Status Notification

    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Server access - Status notification Performs settings for status notification. You can set the status notification when you have set [Enable] under [Status Notification] in the "Settings - Web service settings - Startup settings"...

  • Page 92: Settings - Web Service Settings - Server Access - Device Data Notification

    Chapter 5 TM-DT Software System Development Settings - Web Service settings - Server access - Device Data Notification Performs settings for device data notification. You can set the device data notification when you have set [Enable] under [Device Data Notification] in the "Settings - Web service settings - Startup settings"...

  • Page 93: Settings - System Settings - Network - Tcp/Ip

    Chapter 5 TM-DT Software System Development Settings - System settings - Network - TCP/IP Sets the IP address, etc. of this product. Item Description Get IP Address Sets the method of getting the IP address. IP Address Sets the IP address when [Get IP Address] is set to [Manual]. Subnet Mask Sets the subnet mask when [Get IP Address] is set to [Manual].

  • Page 94: Settings - System Settings - Proxy Settings

    Chapter 5 TM-DT Software System Development Settings - System settings - Proxy settings Performs settings for this product's proxy and the services that use the proxy. Item Description Proxy URL Input the URL for the proxy server in use. Proxy port no. Input the port number for the proxy server in use.

  • Page 95: Settings - System Settings - Date And Time - Time Settings

    Select from "Shutdown" and "Do nothing". ePOS-Device S h u t d o w n Specify the permission settings for shutdown from Epson ePOS SDK for permission JavaScript or ePOS-Device XML. Pa s s w o r d Specifies whether to perform password authentication for shutdown...

  • Page 96: Settings - Admin Settings - Maintenance - Store Restore Settings

    Settings - Admin settings - Maintenance - Store restore settings Stores and restores various settings for TM-DT Software. The stored data is not only used for restoring the product, but is also used to create a TM-T88VI-DT2 with the same settings.
  • Page 97 Chapter 5 TM-DT Software System Development Item Description Restoring Specify a local file Select this when recovering this product using locally saved setting files. settings Setting file Specifies the setting files for restoring the TM-DT software settings. If you want to restore setting files on an optional file path, select [Input directly] and specify the optional file path.
  • Page 98 Chapter 5 TM-DT Software System Development Restored items Items to be restored in the [Restore the settings] are as follows. Item Availability • Device control Startup settings • Network disconnection detection • Device control program startup settings • Automatic update of Web content •...
  • Page 99 Chapter 5 TM-DT Software System Development Item Availability • Spooler settings Print settings Spooler • Forwarding message Available • Print forwarding route • Update schedule Web content Automatic update settings • ID • Password Available • File URL • Server authentication •...
  • Page 100 Chapter 5 TM-DT Software System Development Item Availability • Proxy URL Web access Proxy settings • Proxy port no. • ID Available • Password • Proxy settings • Certificate file Server authentication Available • Date time Date and time Time settings Not available •...

  • Page 101: Settings - Admin Settings - Maintenance - Initialization

    Item Description Initialize Initializes the Web service settings. If you initialize the Web service, the password for EPSON TMNet WebConfig will also be initialized. The initial values are below. • User name: epson • Password: epson Settings - Admin settings - Maintenance - Log Acquires TM-DT Software's log file.

  • Page 102: Settings - Admin Settings - Maintenance - Update Web Service Function

    Chapter 5 TM-DT Software System Development Settings - Admin settings - Maintenance - Update Web service function Updates and sets the Web service function of TM-DT Software. The latest version TM-DT software can be used through renewing the Web service functions. Item Description Specify a local file...

  • Page 103: Settings - Admin Settings - Admin Information - Password

    For confirmation, input the new password again. Apply Registers the set password on this product. • The initial setting of user name and password for EPSON TMNet Webconfig are following. User name: epson Password: epson • Cannot change the user name...

  • Page 104: Tm-Dt Software Specification

    • TM-T70II • TM-T88V • TM-T90 • TM-T90II • TM-T90KP • Following TM printers (Wi-Fi model) • TM-P20 • TM-P60II • TM-P80 • Following TM-Intelligent Printers • TM-T70II-DT • TM-T70II-DT2 • TM-T88V-DT • TM-T88VI-DT2 Number of printers 20 at maximum...

  • Page 105: Software And Manuals

    Control Guide with TM-DT series printers. ✔ It explains device control programs and scripts. This manual is included in the Epson ePOS SDK package. ePOS-Device XML User’s Manual Manual describing the method for transmitting XML data ✔ from applications via socket communication to control printing and peripherals.

  • Page 106: Utility

    Chapter 5 TM-DT Software System Development Utility Software Descriptions TM-T88VI-DT2 Utility Windows-compatible application that performs printer set- tings, network settings, and TM-DT software settings for this product. It is already installed in this product. Related Manuals Manual Descriptions DM-D110/ DM-D210 Technical Reference Guide...

  • Page 107: Pc-Pos System Development

    Chapter 6 PC-POS System Development PC-POS System Development This chapter describes the information necessary to develop a PC-POS system. System Configuration You can install a POS application and drivers on this product and connect peripheral devices to create a simple POS system.

  • Page 108: Peripheral Devices

    USB port COM3 * Connects to a USB port but is recog- nized as a virtual COM port by the COM- (DM-D110 for TM-T88V-DT/ USB conversion driver. TM-T88VI-DT2) Customer display USB port USB device. (DM-D30) HID standard device USB port Keyboard device.

  • Page 109: How To Control Peripherals

    Control can be performed using the following development kits or drivers. • EPSON OPOS ADK • EPSON OPOS ADK for .NET • EPSON Advanced Printer Driver for DM-D Other devices HID Standard Device This Windows standard driver is recognized as a keyboard device.

  • Page 110: Software And Manuals

    *. Because controlling POS peripherals with original commands is not required on the application side, efficient system development is possible. EPSON OPOS ADK for .NET OPOS ADK for .NET allows you to develop applications that are compatible with Microsoft POS for .NET. When develop- ing applications, use a separate development environment such as Microsoft Visual Studio .NET.

  • Page 111: Driver

    This is a general Windows printer driver to which control of paper cutting and the cash drawer have been added, and it also has controls specific to POS. The Status API (Epson original DLL) that monitors printer status and sends ESC/POS commands is also attached to this driver.

  • Page 112: Handling

    Chapter 7 Handling Handling This chapter describes basic handling of the printer. Turning Power On/Off • If you turn the product off, wait more than 10 seconds before you turn it on again. • When the product is turned off or when it is in the sleep mode, do not hold down the power button longer than 4 seconds.

  • Page 113: Functions Of The Power Button

    Chapter 7 Handling Functions of the Power button The functions of the power button when this product is on or in sleep mode can be set on the OS. Power status of this product Operation of this product after the before the power button is Time the power button is pressed power button is pressed...

  • Page 114: Installing And Replacing Roll Paper

    Chapter 7 Handling Installing and Replacing Roll Paper • Do not open the roll paper cover during printing. The printer may be damaged. • Do not touch the manual cutter with your hands when installing or replacing the roll CAUTION paper.
  • Page 115 Chapter 7 Handling Insert the roll paper in the correct direction. Pull out some paper, and close the roll paper cover.
  • Page 116 Chapter 7 Handling Tear off the paper.

  • Page 117: Removing Jammed Paper

    Chapter 7 Handling Removing Jammed Paper Do not touch the thermal head and its surroundings. After printing, the thermal head and its surroundings can be very hot. CAUTION When a paper jam occurs, never pull out the paper forcibly. Follow the steps below if the roll paper is jammed. Press the cover open button to open the roll paper cover.

  • Page 118: If Roll Paper Cover Does Not Open

    Chapter 7 Handling If Roll Paper Cover does not Open If a foreign substance has entered the autocutter or the roll paper jams, the autocutter blade cannot return to the correct position and it locks in place. In this situation, the roll paper cover does not open even if you pull the cover open lever.

  • Page 119: Changing The Orientation Of The Display

    Chapter 7 Handling Changing the orientation of the display Hold the this product with your hand and move the display or arm to change the direction or angle. Do not rotate the display with excessive force. Doing so may break it. The mobile range of the display is as follows.

  • Page 120: Cleaning The Printer

    CAUTION Cleaning the Thermal Head/Platen Roller Epson recommends cleaning the thermal head periodically (generally every 3 months) to maintain receipt print quality. Depending on the roll paper used, paper dust may stick to the platen roller and cause an irregular paper feed. To remove the paper dust, clean the platen roller with a cotton swab moistened with water.

  • Page 121: Preparing For Transport

    Chapter 7 Handling Preparing for Transport Follow the steps below to transport the printer. Operate the power button to turn the power off. Remove the DC connector of the AC adapter, display, keyboard, mouse, and any peripheral devices. Remove the roll paper. Pack the printer upright.

  • Page 122: Replacement Of The Tm-T88V-Dt

    Chapter 8 Replacement of the TM-T88V-DT Replacement of the TM-T88V-DT The TM-T88VI-DT2 is designed so that it can smoothly replace the TM-T88V-DT. This chapter describes precautions for the replacement. Comparison of Product Specifications TM-T88VI-DT2 TM-T88V-DT Base printer TM-T88VI (Max.350mm/s) TM-T88V (Max.300mm/s) ®...
  • Page 123 Chapter 8 Replacement of the TM-T88V-DT TM-T88VI-DT2 TM-T88V-DT Dedicated options Dedicated customer display Dedicated customer display :DM-D110 for TM-T88V-DT/ TM-T88VI-DT2 :DM-D110 for TM-T88V-DT/TM-T88VI-DT2 Customer display Customer display :DM-D30 :DM-D30 Wireless LAN dongle Wireless LAN cable set :Use a commercially available item...

  • Page 124: Compatibility

    TM-T88VI-DT2 is the same as that of the TM-T88V-DT. Cutting Method The TM-T88VI-DT2 uses the partial cutting method (cutting with one point in left edge left uncut) as does the TM-T88V-DT. Manual Paper Feed...

  • Page 125: Memory Capacity

    Chapter 8 Replacement of the TM-T88V-DT Memory Capacity The sizes of the download buffer and NV graphics data of the TM-T88VI-DT2 are the same as those of the TM-T88V-DT. Printer Status The TM-T88VI-DT2 goes to the same status under the same conditions as the TM-T88V-DT. You can replace the TM-T88V-DT with the TM-T88VI-DT2 without modifying applications.

  • Page 126: Overall Dimensions

    Chapter 8 Replacement of the TM-T88V-DT Overall Dimensions You can place the TM-T88VI-DT2 in the same location as the TM-T88V-DT, since its overall dimensions and weight are the same as those of the TM-T88V-DT. TM-T88VI-DT2 TM-T88V-DT (W:145 x D:279 x H:183 Approximately 2.8 kg)

  • Page 127: Additional Functions And Functional Improvements

    Chapter 8 Replacement of the TM-T88V-DT Additional Functions and Functional Improvements Print Speed The default printing speed for the TM-T88VI-DT2 may vary depending on the specification. TM-T88VI-DT2 TM-T88V-DT Default Up to 300 or 350 mm/s Up to 300 mm/s Maximum print speed...

  • Page 128: Product Specifications

    Product Specifications Product Specifications This chapter describes the TM-T88VI-DT2 product specifications. Controller Specifications Item Intel® Core ™ i5 model Intel® Core ™ i3 model Intel® Celeron® model ® ® ® Intel Core™ i5-7300U Intel Core™ i3-7100U Intel Celeron® 2.60GHz 2.40GHz 3965U 2.20GHz...
  • Page 129 Product Specifications Item Intel® Core ™ i5 model Intel® Core ™ i3 model Intel® Celeron® model Printer unit Base printer TM-T88VI Printing method Direct thermal line thermal printing Speed 350 mm/s Dot density 180 × 180 dpi Paper width Paper width 80mm {3.15"} (The paper width can be changed to 58mm {2.28"}) Software BIOS...

  • Page 130: Printer Specifications

    Product Specifications Printer Specifications Printing Specifications 58 mm width paper 80 mm width paper Items printing printing Printing method Thermal line printing Dot density 180 × 180 dpi Printing direction Unidirectional with friction feed (Reverse feed is not supported.) P r i n t i n g Standard column mode 50.8 mm (2.0"), 360 dots 72.0 mm (2.83"), 512 dots...

  • Page 131: Character Specifications

    Product Specifications Character Specifications 58 mm width paper 80 mm width paper Items printing printing Number of characters Alphanumeric characters: 95 Extended graphics: 128 × 43 pages (including user-defined page) International characters: 18 sets Character Standard ANK font A 12 × 24 dots (Right-side dot space: 2) structure column mode ANK font B...

  • Page 132: Printable Area

    Product Specifications Printable Area 58 mm paper width printing The printable area of paper with a width of 57.5 ± 0.5 mm {2.26 ± 0.02"} is 50.8 ± 0.2 mm {2.00 ± 0.008"} (360 dots), and the space on the left side is approximately 3.7 mm {0.15"} and the space on the right side is approximately 3.0 mm {0.12"}.
  • Page 133 Product Specifications 80 mm paper width printing The printable area of paper with a width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"} (512 dots), and the space on the right and left sides is approximately 3.7 mm {0.15"}. Roll paper width 79.5±0.5 mm {3.13±0.02”} 0.141±0.05 mm {0.0056±0.002”}...

  • Page 134: Printing And Cutting Positions

    Product Specifications Printing and Cutting Positions Last line of a previous receipt Manual-cutter position Approx. 29 Approx. 15 Autocutter blade position Center of the print dotline Printable area Paper feed direction [units: mm (All the numeric values are typical.)] • The values above may vary slightly as a result of paper slack or variations in the paper. Take this into account when setting the cutting position of the autocutter.

  • Page 135: Paper Specifications

    Paper width 57.5 ± 0.5 mm 79.5 ± 0.5 mm Specified original roll paper type Epson Certified Media List for Thermal Receipt Printers ☞ www.epson-biz.com/?content=sht_tm_media Specified original paper type P30521, P30523, P31523, P35524 (Kanzaki Specialty Papers) AF50KS-E (Jujo Thermal Oy)

  • Page 136: Power Supply Capacity For External Devices

    Product Specifications Power supply capacity for external devices Port Power supply Supply capacity USB 3.0 Type A * DC +5 V 900 mA each USB 2.0 Type A * DC +5 V 500 mA USB 2.0 Type-C * DC +5 V Drawer DC +24 V HDMI...

  • Page 137: Environmental Conditions

    When printing: 55 dB When standby: 42 dB Note: The values above are measured in the Epson evaluation condition. Acoustic noise differs depending on the paper used, printing contents, and the setting values, such as print speed or print density.

  • Page 138: Reliability

    Product Specifications Reliability Item Specification MTBF Controller 169,000 hours (excluding SSD, fan, and options) Printer 360,000 hours AC adapter 150,000 hours MCBF Printer 70 million lines (This is an average failure interval based on failures related to wear out and random failures up to the life of 20 million lines.) Parts with limited Controller...

  • Page 139: External Dimensions

    Product Specifications External Dimensions • Width: 145 mm {5.71"} • Depth: 279 mm {10.98"} (including connector cover) • Height: 183 mm {7.20"}...
  • Page 140 Product Specifications When the dedicated customer display (DM-D110 for TM-T88V-DT/TM-T88VI- DT2) with a crank pole is installed • Width: 177 mm {6.97"} • Depth: 365 mm {14.37"} • Height: 202 mm {7.95"} • Mass Approximately 3.2 kg {7.06 lb}...
  • Page 141 Product Specifications When the dedicated customer display (DM-D110 for TM-T88V-DT/TM-T88VI- DT2) with a straight pole is installed • Width: 177 mm {6.97"} • Depth: 289 mm {11.38"} • Height: 358 mm {14.09"} • Height: 202 mm {7.95"} • Mass Approximately 3.2 kg {7.06 lb}...

  • Page 142: Ac Adapter Specifications

    Product Specifications AC Adapter Specifications 1500 33.5 24.3 [Units: mm] Item Specification Input conditions Input voltage AC 100 V to 240 V Frequency 50/60 Hz Input current (rating) 2.4 A Output conditions Output voltage (rating) DC 24 V ± 5 % Output current (rating) 4.2A...

  • Page 143: Interface

    Product Specifications Interface USB 3.0 port Item Specifications Compliant standards USB 3.0 Specification Number of ports 6 ports Connector Type A Bus power 5V, 900mA each (Bus power is output even at Sleep) Functions of each connector pin Pin No. Signal Description VBUS...

  • Page 144: Usb 2.0 Port (Type A)

    Product Specifications USB 2.0 port (Type A) Item Specifications Compliant standards USB 2.0 Specification Number of ports 1 ports Connector Type A Bus power 5V, 500mA (Bus power is output even at Sleep) Functions of each connector pin Pin No. Signal Description VBUS...

  • Page 145: Usb 2.0 Port (Type-C)

    Product Specifications USB 2.0 port (Type-C) Item Specifications Compliant standards USB 2.0 Specification Number of ports 1 ports Connector Type-C Bus power 5V, 3A (Bus power is output even at Sleep) Functions of each connector pin Pin No. Signal Description Pin No.

  • Page 146: Line-Out Port

    Functions of each connector pin Pin No. Signal Description LINE_L Line-out, left channel LINE_JS Jack sense input LINE_R Line-out, right channel When an external speaker is connected to this jack, output to the internal TM-T88VI-DT2 speaker is instead sent to the external speaker.

  • Page 147: Serial Port

    Product Specifications Serial port Item Specifications Number of ports 1 port Connector DSUB 9-pin male Female screw Unified (inch) screw No.4-40 UNC Maximum Communication speed 115200 bps Functions of each connector pin Pin No. Signal Description N.C. Not used RXD (Receive data) TXD (Transmit data) N.C.

  • Page 148: Vga Port

    Product Specifications VGA port Item Specifications Compliant standards VESA Video Signal Standard (VSIS) Version 1, Rev.2 Compliant Support DDC communication (+5V level I2C interface) Maximum resolution 1920 x 1200 dots /60Hz Number of ports 1 port Connector DSUB 15-pin female Functions of each connector pin Pin No.

  • Page 149: Hdmi Port

    Product Specifications HDMI port Item Specifications Compliant standards HDMI 1.4 Specification Maximum resolution 4096 x 2160 @ 24 Hz; 24 bpp Number of ports 1 port Connector Standard HDMI 19pin Type A Receptacle (female) Functions of each connector pin Pin No. Signal Description TMDS Data2+...

  • Page 150: Drawer Kick Connector

    Product Specifications Drawer kick connector Item Specifications Compliant standards RJ12 6pin Number of ports 1 port Drawer side connector RJ12 telephone jack (6-position 6-contact) Functions of each connector pin Pin No. Signal Direction Frame GND Drawer kick drive signal 1 Output Drawer open/close signal Input...

  • Page 151: Bios

    Product Specifications BIOS This section describes the controller BIOS. Starting and Ending BIOS Setup The following describes the methods for starting and ending BIOS Setup. Starting Confirm that the power of this product is off and then connect the display, keyboard, and mouse.

  • Page 152: Disabling The Usb Port

    Product Specifications Disabling the USB Port By disabling the USB port that is not in use, you can prevent the controller from detecting a USB memory or the like that is connected. Once BIOS starts up, select [Security] - [USB Port Configuration]. Select [USB Port Disable Override].

  • Page 153: Bios Setting

    Product Specifications BIOS setting Menu Item Hardware Information Total Memory SATA SSD1 SATA SSD2 NVME SSD1 NVME SSD1 Sub Board Main BIOS Information BIOS Vendor Core Version Project Version Model Access Level System Date System Time Type Speed L1 Data Cache L1 Instruction Cache CPU Configuration L2 Cache...
  • Page 154 Product Specifications Menu Item ACPI Shutdown Temperature CPU Temperature Fan Speed Thermal CPU Fan Mode Configuration CPUFAN Temperature 1 CPUFAN DC/PWM 1 CPUFAN Temperature 2 CPUFAN DC/PWM 2 CPUFAN Critical Temp Tolerance Enable ACPI Auto Configuration ACPI Configuration Enable Hibernation ACPI Sleep State CSM Support CSM16 Module Version...
  • Page 155 Product Specifications Menu Item ME Firmware Version ME Firmware Mode ME Firmware SKU Intel ME Advanced ME State Configuration Manageability Features State ME Unconfig on RTC Clear ME Firmware Update Configuration USB Configuration USB Module Version USB Controllers: USB Devices: USB Configuration Type-C Port Charge Legacy USB Support...
  • Page 156 Product Specifications Menu Item SATA Controller(s) SATA Mode Selection SATA Controller Speed Serial ATA Port 1 SATA Software Preserve Configuration Port 1 Serial ATA Port 2 Software Preserve Port 2 NVMe NVMe Configuration Chipset Configuration Serial Port Serial Port 1 Configuration Configuration SIO GP20 GP20 Output setting...
  • Page 157 Product Specifications Menu Item Security Device Support Active PCR banks Available PCR banks SHA-1 PCR Bank SHA256 PCR Bank Security TPM Configuration Pending operation Platform Hierarchy Storage Hierarchy Endorsement Hierarchy TPM2.0 UEFI Spec Version Physical Presence Spec Version TPM 20 InterfaceType Device Select Quiet Boot Hide Specified Log...

  • Page 158: Character Code Tables

    Product Specifications Character Code Tables Refer to the following URL regarding the character code table. www.epson-biz.com/pos/reference/charcode/...

  • Page 159: Open Source Software License

    Product Specifications Open Source Software License 1 ) This printer product includes open source software programs listed in Section 5) according to the license terms of each open source software program. 2 ) We provide the source code of the GPL Programs and LGPL Programs until five (5) years after the discontinuation of same model of this printer product.

  • Page 160: Microsoft Software License Terms

    Product Specifications MICROSOFT SOFTWARE LICENSE TERMS WINDOWS 10 IOT ENTERPRISE & MOBILE (ALL EDITIONS) IF YOU LIVE IN (OR IF YOUR PRINCIPAL PLACE OF BUSINESS IS IN) THE UNITED STATES, PLEASE READ THE BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER IN SECTION 9. IT AFFECTS HOW DISPUTES ARE RESOLVED.
  • Page 161 Product Specifications (vi) reverse engineer, decompile, or disassemble the software, or attempt to do so, except and only to the extent that the foregoing restriction is (a) permitted by applicable law; (b) permitted by licensing terms governing the use of open source components that may be included with the software; or (c) required to debug changes to any libraries licensed under the GNU Lesser General Public License which are included with and linked to by the software;...
  • Page 162 Product Specifications 4. Transfer a. Software preinstalled on device. If you acquired the software preinstalled on a device, you may transfer the license to use the software directly to another user, only with the licensed device. The transfer must include the software and, if provided with the device, an authentic Windows label including the product key.
  • Page 163 Product Specifications d. Arbitration procedure. The AAA will conduct any arbitration under its Commercial Arbitration Rules (or if you are an individual and use the software for personal or household use, or if the value of the dispute is $75,000 USD or less whether or not you are an individual or how you use the software, its Consumer Arbitration Rules).
  • Page 164 Product Specifications d. Germany and Austria. (i) Warranty. The properly licensed software will perform substantially as described in any Microsoft materials that accompany the software. However, the manufacturer or installer, and Microsoft, give no contractual guarantee in relation to the licensed software. (ii) Limitation of Liability.
  • Page 165 Product Specifications NO WARRANTY THE SOFTWARE ON YOUR DEVICE (INCLUDING THE APPS) IS LICENSED "AS IS." TO THE MAXIMUM EXTENT PERMITTED BY YOUR LOCAL LAWS, YOU BEAR THE ENTIRE RISK AS TO THE SOFTWARE'S QUALITY AND PERFORMANCE. SHOULD IT PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL SERVICING OR REPAIR. NEITHER THE DEVICE MANUFACTURER NOR MICROSOFT GIVES ANY EXPRESS WARRANTIES, GUARANTEES, OR CONDITIONS FOR THE SOFTWARE.

Table of Contents