Attaching/Removing The Connector Cover; Attaching The Connector Cover; Removing The Connector Cover - Epson TM-T88IV Technical Reference Manual

Attaching/Removing the Connector Cover

Attaching the Connector Cover

1
Connect all the cables.
The connector cover has three possible cable exits: on the right, left, and back.
2
Position the two hooks on the connector cover so that they hook the
holes on the printer case. Push the connector cover down until it clicks.
Hooks

Removing the Connector Cover

Place the printer with its bottom up. While pushing the both sides of the connector cover toward
inside, push it down to detach the two hooks on it from the printer case.
Chapter 4 Handling
4
69