Changing The Paper Width - Epson TM-T88VII Technical Reference Manual

Changing the Paper Width

You can change the paper width from 80 to 58 mm by installing the included 58-mm width roll paper guides.
Follow the steps below to change the paper width.
Once you change the paper width to 58 mm and print on 58-mm width roll paper, you cannot go back
to 80 mm width. Because parts of the print head that do not normally touch the paper may be
damaged by the platen roller, and the autocutter may wear out.
1
Make sure the printer is turned off.
2
Open the roll paper cover.
3
Install the roll paper guide so that the protrusion on the roll paper holder is aligned
with the hole on the printer.
Hole
You can use the enclosed screw to fix the roll paper guide.
4
Set the paper width in software setting mode.
For information about the software setting mode, see
Protrusion
"Software Settings" on page
Chapter 2 Setup
59.
49