Changing the Roll Paper Width
This printer allows for the paper width of the roll paper to be changed. It can be selected from four types: 57.5
mm {2.26"}, 69.5 mm {2.74"}, 76 mm {2.99"}, and 82.5 mm {3.25"}. (The default is 76 mm {2.99"}.)
Follow the procedure below to change the paper width.
When changing the paper width, be sure to change the setting for the paper width by using the
Do not change to wider paper width after using a narrower paper width. The autocutter blade may
1
Make sure the printer is turned off.
2
Open the Roll paper cover by pressing the cover open button.
3
Remove the screw holding the roll paper guide located on the left side of the roll
paper holder.
26
TM-J7200 TM-J7700 Utility or customize value. (See
be worn and may not be able to cut cleanly.
"Customize Value Setting Mode" on page
54)