Di/Do Configuration - ICP DAS USA tET Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Ethernet I/O Modules
4.3.2

DI/DO Configuration

The following table provides an overview of the parameters contained in the DI/DO Configuration
section:
Item
Digital Output
Host Watchdog Timeout
(Seconds)
Safe Value
Power-On Value
Digital Counter
Enable Digital Counter
Clear Digital Counter
Preset Counter Value
ICP DAS CO., LTD.
Description
This parameter is used to configure the Host Watchdog timeout value. If there
is no Modbus TCP communication activity for the specified period (the
timeout), then the Host Watchdog will activate an alarm.
This parameter is used to define the DO safe value for the PETL/tET/tPET
module. If the Host Watchdog alarm is activated, the DO will be set to the
user-defined safe value.
This parameter is used to define the DO Power-on value. On boot up, the DO is
set to the user-defined Power-on value.
This parameter is used to enable the digital counter on each DI channels.
This parameter is used to clear the values of each DI counters.
This parameter is used to set the default value for each DI counters.
PETL/tET/tPET DIO Series User Manual, Ver. 2.1, Sep. 2014, Page: 54