Transmission Start Character And End Character; Full Ascii Recognition Range - ELZAB DE2106 Setting Manual

Transmission start character and end character

Code 39 barcode data has a character "*" before and after it is used as the start
character and stop character. You can set whether to transmit the start character and
stop character together with the barcode data after the barcode is successfully read.
Transmission start character and end

Full ASCII recognition range

Code 39 code data can include all ASCII characters, but the scanner only reads part of
ASCII characters by default. By setting, you can turn on the function of reading complete
ASCII characters
The default is "Do not recognize full ASCII characters"
Recognize full ASCII characters
character
Do not transmit start and end characters
Does not recognize full ASCII characters
97 / 134