Continuous Reading Mode-The Same Barcode Reading Delay - ELZAB DE2106 Setting Manual

51 / 134
4. Scan the "Save" setting code in "Appendix-Save and Cancel Settings";
5. Scan the "Disable Settings" setting code.

Continuous reading mode-the same barcode reading delay

In order to avoid the same bar code being read multiple times in a short period of time in
the continuous reading mode, you can request the reading module to delay the set time in
this mode before allowing the same bar code to be read.
The same barcode reading delay means that after reading a barcode, within the set time,
refuse to read the same barcode. Only after the duration has expired can it be read and
output.
Set to "Reading the same barcode without delay", the same barcode will be output
immediately after reading.
Set to "require the same bar code reading delay" and set "reread timeout without reset",
which means that the same bar code can be read and transmitted after the timeout limit
time after reading the same bar code.
Set to "require the same barcode reading delay" and set "reread timeout reset", which
means that the same barcode will not be read and transmitted if it continues to read the
same barcode within the limited time after reading.
If the same barcode delay is set to "Modify the same barcode reading delay is unlimited",
the same barcode will not be read repeatedly and will not be output without power failure.