Table of Contents
Advertisement
79 / 134
Custom end suffix
Read the "modify end character" and combine to read the data code to modify the
character content of the end character.
When modifying end character, use 2 hexadecimal values to represent the characters, and
read 2 or 4 values sequentially to represent 1 character or 2 characters. For the
hexadecimal conversion of characters, please refer to "Appendix-ASCII Code Table".
modify end character
Example: Modify the ending character to the letter 0x0D
1. Scan the "Start Setting" setting code (you don't need to scan when it is turned on);
2. Scan the "modify end character" setting code;
3. Scan the "0" and "D" setting codes in "Appendix-Data Code" in turn;
4. Scan the "Save" setting code in "Appendix-Save and Cancel Settings";
5. Scan the "Close Settings" setting code.
Advertisement
Table of Contents
