Set Code Identification - ELZAB DE2106 Setting Manual

9 / 134

Set code identification

Instructions for use:
In manual barcode reading mode, the operation steps for scanning barcodes are as
follows
1. Press and hold the trigger button of the scanner, the line of sight is activated, and a
red line of sight appears.
2. Aim the red line of sight to the center of the barcode, move the scanner and adjust
the distance between it and the barcode to find the best reading distance.
3. When you hear the success prompt sound and the red lighting line goes out, the
code reading is successful, and the scanner transmits the data after reading the code
to the host.
Note: During the reading process, for the same batch of barcodes, you will find that
the distance between the scanner and the barcode is within a certain range, and the
reading success rate will be very high. This distance is the best reading distance.