Enable And Disable The Configuration Code; Sending Setting Code - ELZAB DE2106 Setting Manual

10 / 134

Enable and disable the configuration code

The setting code can be turned off. When the scanner is set to "Enable setting code" and
scanning the setting code, the setting function will take effect. When the scanner is set to
"Disable setting code", when scanning the setting code, an error tone of the scan engine
will appear and the setting function will not work. The default is "Enable Setting Code".
Enable setting code Disable setting code

Sending setting code

The content of the setting code can be allowed to be sent. After reading the "send setting
code" and setting successfully, the content will be sent to the host when the setting code
is read; after reading the "do not send setting code" and setting is successful, the scanner
will no longer send the setting code content .
The default is "Do not send setting code"
send setting code Do not send setting code