Induction Reading Mode-Same Barcode Reading Delay - ELZAB DE2106 Setting Manual

56 / 134
Modify the single reading time 3000ms Modify the single reading time of 5000ms
Custom modify the limit of single reading time
Example: To set the limit time of a single code reading to 1500ms, you can set it according
to the following steps:
1. Scan the "Enable Setting" setting code (you don't need to scan when it is turned on);
2. Scan the setting code of "Custom modify single reading time limit";
3. Scan the "1", "5", "0" and "0" setting codes in "Appendix-Data Code" in turn;
4. Scan the "Save" setting code in "Appendix-Save and Cancel Settings";
5. Scan the "Disable Settings" setting code.

Induction reading mode-same barcode reading delay

In order to avoid the same bar code being read multiple times in a short period of time
in the induction reading mode, the reading module can be required to read the same bar
code after a delay in this mode.