Duration Of The Indicator Light For Reading Barcode Successful - ELZAB DE2106 Setting Manual

Duration of the indicator light for reading barcode successful

Read the following setting codes, you can modify the LED prompt time, the default time is
200ms.
Modify the LED prompt time to 100ms
Modify the LED prompt time to 500ms
Example: Customize and modify the LED prompt time to 300ms, you can set it
according to the following steps:
1. Scan the "Enable setting code" (you don't need to scan when it is turned on);
2. Scan the setting code of "Customize and Modify LED Prompt Time";
3. Scan the "3", "0" and "0" setting codes in turn in "Appendix-Data Code";
4. Scan the "Save" or Cancel setting code in Appendix-Save ;
5. Scan the "Disable Settings code".
Modify the LED prompt time 200ms
Customize and modify LED prompt time
17 / 134