76 / 134
Step 6: Scan the "Appendix-Data Code" number "0" "C" setting code in turn;
Step 7: Scan the "Save" setting code of "Appendix-Save and Cancel Settings".
Step 2: Set the transmission field
Transfer complete Data field
Only the Start field is transmitted
Only transfer the Center field
Only the End field is transmitted
Example: After setting the complete Data barcode "12345678901234567890", the length of
the Start field is 4 and the length of the End field is 12:
Set "Transfer Complete Data Field" and the output result is: 12345678901234567890
Set "only transfer Start field" output result is: 1234
Set "only transfer Center field" output result is: 5678
Set "Transfer End Field Only" and the output result is: 901234567890