Powering On The Phone; Powering Off The Phone - Cisco WIP310 User Manual

Installing the WIP310

Powering On the Phone

STEP 2
STEP 3
NOTE
NOTE
Powering On the Phone

Powering Off the Phone

Cisco WIP310 User Guide
Insert the adapter into a wall outlet.
Charge the phone by placing the phone into the charger.
You can also charge the phone using the USB cable. Connect one end to your
phone and the other end to a USB port on your personal computer.
The phone briefly displays a charging icon and the LED is solid red. When the LED
is solid green, the phone is fully charged.
The battery needs to charge for at least 8 hours prior to the phone's initial use. Do
not power on the phone until it has charged for at least 8 hours.
Power on the phone by pressing and holding the Power/End Call button for
approximately five seconds until the screen is lit. The phone is ready to use when
the Home screen appears (in approximately 30 seconds).
Power off the phone by pressing and holding the Power/End Call button until the
screen becomes dark.
2
23