Table of Contents
Advertisement
65MIE
2. Use one of the arrow keys to move between options and modify the se-
lected options by using PgUp / PgDn / + / - keys.
<F1>: "Help" gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
ACPI Function Select Enabled only if your computer's operating sys-
ACPI Suspend Type This item will allow you to select the ACPI suspend
Power Management This option allows you to select the type (or degree)
Max Saving
User Define
Min Saving
tem supports the Advanced Configuration and Power
Interface (ACPI) specification. Currently, Windows
NT 5.0 support ACPI.
type. You can select S3(STR) for suspending to DRAM
or S1(POS) for power on suspend under Windows
98 ACPI mode.
The choice: S1(POS), S3(STR).
of power saving for Doze, Standby, and Suspend
modes.
This table describes each power management mode:
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out periods
in the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour
in each mode (except the hard drive).
70
Advertisement
Table of Contents
