SOLTEK SL-65MIE User Manual page 66

65MIE
On-Chip Primary/
Secondary PCI IDE
Primary
Master / Slave PIO
Secondary
Master / Slave PIO
Primary
Master / Slave UDMA
Secondary
Master / Slave UDMA
USB Controller Select Enabled if your system contains a Universal
USB Keyboard Sup-
USB Mouse Support Select Enabled if your system contains a Universal
Init Display First Initialize the AGP video display before initializing any
AC97 Audio/Modem This option allows you to decide to enable/disable
The chipset contains a PCI IDE interface with sup-
port from two IDE channels. Select Enabled to acti-
vate the first and/or the second IDE interface. Select
Disabled to deactivate an interface if you install a pri-
mary and/or second add-on IDE interface.
The choice: Enabled; Disabled.
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose Auto.
You need to set to a lower mode than Auto when your
hard disk becomes unstable.
The choices: Auto; Mode 0; Mode 1; Mode 2;
Mode 3; Mode 4.
Ultra DMA33/66/100 implementation is possible only
if your IDE hard drive supports it, if the operating en-
vironment includes a DMA drive, and if your system
software support Ultra DMA33/66/100. Select "Auto"
to enable BIOS support.
The choices: Auto; Disabled.
Serial Bus (USB) controller and you have USB
peripherals.
Select Enabled if your system contains a Universal
port Serial Bus (USB) controller and you have a USB
keyboard.
Serial Bus (USB) controller and you have a USB
mouse.
other display device on the system. Thus the AGP
display becomes the primary display.
The choices: PCI Slot; AGP.
the 815 chipset to support AC97 Audio/Modem.
The choice:Auto; Disabled
66