Table of Contents
Advertisement
MLC 14VRS RegisterControl ATEX
This data is entered into the electronic type plate during the production. The
content of the electronic type plate can be read via the "MB_RegiSensor01Read-
DiagType01" function block of the "RMB_TechRegiExtended" library.
13 Troubleshooting and debugging
LEDs indicate the operating states of the mark stream sensor PY-MSS01.1-T1.
For the description of the LED displays, refer to
error displays" on page
NOTICE
Do not open the housing of the mark stream sensor PY-MSS01.1-T1!
Repairs at the device by the customer are not permitted. Exceptions
are maintenance works listed in the chapter "Maintenance".
For further information in the event of repair, please contact the
Bosch Rexroth Service.
14 Maintenance and repair
The service life is increased by regular, preventive maintenance. Comply with the
specifications of the machine manufacturer in the machine maintenance sched-
ule as well as with the following specifications regarding maintenance measures
and intervals at the PY-MSS01.1-T1 mark stream sensor.
WARNING
Do not work at running or unsecured machines
●
Prior to start working at the machines, secure the machines against unpre-
●
dictable motions and operation by unauthorized personnel
Secure the mark stream sensor, the sensor optics and the supply lines from
●
falling before releasing mechanical connections
In case of malfunctions or maintenance and or repair work of the PY-MSS01.1-T1
mark stream sensor, proceed as follows:
1. Set the machine to standstill.
2. Disconnect the voltage of the mark stream sensor.
3. Switch off the main switch of the machine.
4. Secure the machine against unpredicted motions and operation by unau-
thorized personnel.
30.
Do not open the housing!
Personal injuries and damage to property in
case of maintenance or repair work!
Maintenance and repair
chapter 12.2.2 "Operating and
R911341913_Edition 05 Bosch Rexroth AG
33/39
Advertisement
Table of Contents
