Ethernet Interface X7E Eth; Incremental Encoder Interface X8T Ttl - Bosch rexroth RegisterControl ATEX MLC 14VRS Operating Instructions Manual

18/39
Interfaces

9.3 Ethernet interface X7E ETH

The Rexroth mark stream sensor can be connected to an Ethernet network via
the Ethernet interface. The interface is a 4-pin M12 circular socket.
M12 circular socket, 4-pin
Type
Cable length
Cable type
Transmission rate
Tab. 9-3: Technical data of the Ethernet interface
Ethernet
RJ45
Connection housing
Fig. 9-5: Connecting lead at X7E ETH
Pin
1
2
3
4
Tab. 9-4: X7E ETH pin assignment
NOTICE
Do not connect the device to a telecommunications network.

9.4 Incremental encoder interface X8T TTL

Via the incremental interface, the mark stream sensor PY-MSS01.1-T1 can be
connected to a Bosch Rexroth drive via the control unit option "Encoder emula-
tion output card" to transmit the velocity information to the mark stream sensor
PY-MSS01.1-T1.
Bosch Rexroth AG R911341913_Edition 05
MLC 14VRS RegisterControl ATEX
Ethernet 10Base T/100Base TX
100 m max.
Shielded, twisted pair, Cat 5
10 or 100 MBit/s
Connection housing
Function
TX+
RX+
TX-
RX-
The PY-MSS01.1-T1 mark stream sensor is not
intended for connection to telecommunications
networks!
Mark Stream Sensor
Ethernet, X7E