Table of Contents
Advertisement
MLC 14VRS RegisterControl ATEX
7 Technical data
7.1 General data
Sampling frequency
Resolution
Sensitivity
Light source
Interfaces
Digital interface
Date of manufacturing
Maximum path velocity
Setup velocity
Format length
Printing materials
Number of colors
Colors
Length of mark pattern
Other printing
250 kHz
16 bits per channel
8 amplifying stages in the ratio 2:1
Power-limited white light source PR0138; current-controlled operation
Incremental encoder connection, M12 8-pin, circular socket
Ethernet interface, M12 4-pin, circular socket
Power supply, M12 8-pin, circular connector
Connecting the sensor optics via two optical fibers with SMA port
1 differential input for a signal level of 24 V
2 differential outputs for high speed signals with levels of 24 V. Current
limitation of 30 mA, suitable for connection lengths for up to 5 m and
an edge steepness of < 2 µs
The manufacturing date is specified on the type plate behind the "FD:"
label as quarter FD following DIN ISO 8601.
Structure of the 5-digit alphanumerical quarter FD: Year (2 digits),
quarter (1 digit) and quarter of the current year (2 digits) = YYQqq
Example:
11Q04 = 4th quarter 2011
1200 m/min (= 20m/s)
At least 1 m/min (0.017 m/s)
0.3 m - 2.5 m
Cardboard (folding carton), plastic foil (BOPP, PET, LDPE,...) and alu-
minum foil, laminate and paper
Up to 12 registration marks at a same time
Solvent colors, watercolors, UV colors, varnishes (ethyl acetate and
ethanol)
Results from the number of colors and mark distances
The maximum length of the mark window depends on the setup veloci-
ty:
Ca. 0.6 m at 10 m/min
●
Ca. 0.3 m at 5 m/min
●
Ca. 0.06 m at 1 m/min
●
Printing before and after the mark pattern is possible, but not during
the mark pattern
R911341913_Edition 05 Bosch Rexroth AG
11/39
Technical data
Advertisement
Table of Contents
