Table of Contents
Advertisement
Installation instructions - Bicycle rack
Edition 01
2
Safety notes
WARNING
The procedures and safety notes detailed in these in-
structions for the installation, handling and use of the bi-
cycle rack must always be observed.
◆ Deviating from these instructions even slightly can
cause the bicycle rack or the mounted bicycle to
come loose.
◆ The bicycle rack is designed such that the vehicle will
not be damaged if components are installed, handled
and used properly.
◆ The manufacturer is not liable for any damage result-
ing from failure to comply with the installation proce-
dure or notes specified.
◆ All forms of warranty claim against the manufacturer
are invalidated if installation, handling or use of the
components is not carried out as specified in these
instructions.
WARNING
The bicycle rack for the roof bars is only suitable for
transporting bicycles.
◆ Replace damaged components immediately.
◆ Do not use elasticated straps or bungee cords!
Key number
– Note the key number of your bicycle rack here. This will facil-
itate replacement in the event of loss.
Note
Store the description and key in the glove compartment!
Roof load and bicycle rack load
WARNING
Never exceed
◆ the maximum permissible roof load,
◆ the gross axle weight rating,
◆ and the gross vehicle weight rating
⇒ Vehicle Owner's Manual – Risk of acci-
for your vehicle
dent!
The bicycle rack may be loaded with a single bicycle weighing
up to 20 kg (44.1 lbs).
2
2 Safety notes
Advertisement
Table of Contents
