Table of Contents
Advertisement
5.4
Removing the bicycle from the bicycle
holder
– Open the tighteners -5- and then bend the tensioning belt
-11- towards the rear and insert it in the tensioning belt hold-
er -D- on the wheel mount -1-.
– Use the key -4- provided to open the lock on the rotary knob
-8-.
– Hold the bicycle in place and press the lever -I- under the ro-
tary knob -8- -arrow a- to open the fastener -2- on the retain-
er -3- -arrow b-.
– Remove the bicycle carefully from the bicycle rack.
– Once the bicycle has been removed, push the rear wheel
mount -1- forwards -arrow A-until the retainer -3- can be
supported.
– Swivel the retainer -3- downwards -arrow B- and place it on
the wheel mount -1-.
Caution
Ensure that there is a gap between the tensioning belt -11-
and the roof of the vehicle — risk of roof damage!
– Route the tensioning belt -11- over the retainer -2-, align it
centrally and insert it in the tightener -5- to secure the retain-
er.
– Insert the front tensioning belt -11- in the tightener -5- and
align it centrally.
Caution
Ensure that there is a gap between the tensioning belt -11-
and the roof of the vehicle — risk of roof damage!
– Tighten the tensioning belt -11- evenly on each side.
Installation instructions - Bicycle rack
5 Installing/removing the bicycle rack and bicycle
Edition 01
13
Advertisement
Table of Contents
