Product Specifications; Replacement Parts - Ryobi RPGENINV4K Manual

PRODUCT SPECIFICATIONS

Generator
Model
Engine type
Rated voltage
Rated amps
Rated output
Rated frequency
Fuel tank capacity
Fuel type:
Unleaded fuel (91 or higher)
Oil tank capacity
Oil type:
SAE 10W-30 API-SJ or higher weight oil
Noise emission level (in accordance with EN ISO 3744:2010)
A-Weighted sound pressure level at
operator's position
Uncertainty of measurement
A-Weighted sound power level
Uncertainty of measurement
+ K
L
wA wA

REPLACEMENT PARTS

Spark plug TORCH F7RTC or NGK BPR7ES
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
RPGENINV4K
another. They may be used for a preliminary assessment
of exposure.
212cc OHV
The declared vibration and noise emission values represent
240 V
the main applications of the tool. However, if the tool is used
12.9 A
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
3100 W
may differ. These conditions may significantly increase the
50 Hz
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
12 L (+/-50 mL)
into account the times when the tool is turned off or when
it is running idle. These conditions may significantly reduce
the exposure level over the total working period.
0.6 L (+/-50 mL)
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
= 75.26 dB(A)
L
pA
K = 0.75 dB
= 95.26 dB(A)
L
wA
K = 0.75 dB
96 dB(A)