Table of Contents
Advertisement
USING
THE
AC
OUTLETS
OVERLOAD RESET SWITCH
1. Turn the start lever to the START
position. Pull the starter grip until the
product runs.
NOTE: Do not allow the starter grip to
snap back after starting. Return it gently
to its original place.
2. Allow the product to run for 15-30
seconds, then turn the lever to the RUN
position.
3. Lift the AC outlet covers.
4. Connect the device to be powered to the
AC outlet.
WARNING: Never add more loads than
the product capacity. Do not use multiple
sockets. Connect only one device to each
AC outlet.
When the overload LED indicator is on, the
product is overloaded and there is no output.
1
2
AND
3
4
1
2
15-30s
9
Operation
Advertisement
Table of Contents
